Recommended Flat Towing Parts for a 2003 Toyota MR2 Spyder

Updated 10/29/2023 | Published 10/28/2023

Products Featured in This Question

etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates - RV Mount - 6,000 lbs

(337)

$850.17

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3413)

$159.90

Question:

Considering buying a 2003 Toyota mr2 spyder as a toad. Do you sell a complete kit for it, tow bar,base plate, brake controller, etc?

asked by: Gerry O

Expert Reply:

We have all of the parts you will need but we do not sell one big kit. You will want to make sure it has a manual transmission. The automatics can't be flat towed. I have listed everything below that you will need to flat tow your 2003 Toyota MR2 Spyder:

Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar Base Plates item # e44ZR

Base Plate Kit - Roadmaster Crossbar-Style Base Plate Kit item # 1169-1

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267

Supplemental Braking System - Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.