Correct Shroud Replacement for an Older Coleman AC

Question

Question:

My unit dimensions are 13inch H x 32.5inch L x 22 3/4inch W. The Coleman Maxxair shroud that came up in my search looks like it should fit. Do yall recommend something else for the above dimmensions?

asked by: John

0

Expert Reply:

Correct, the Replacement RV Air Conditioner Cover for MaxxAir TuffMaxx Units # MA00-325001 you're looking at will work with your Coleman AC. This shroud measures 41-5/8" long x 29-3/8" wide x 12-3/4" tall, so it'll have plenty of room to fit your unit.

expert reply by: Bryce D

0

Coleman AC
(click to enlarge)

Answer 1

From my research on the Coleman TSR Air Conditioning units, the MaxxAir TuffMax Replacement Shroud #MA00-325001 works. I've provided a diagram that shows the dimensions of the shroud and if you can verify that your unit is that size, the MaxxAir…

view full answer...

Answer 2

From previous customers with a Coleman TSR air conditioner that gave us dimensions we have the MaxxAir TuffMaxx Replacement Shroud #MA00-325001 that we've been able to confirm as a fit.

view full answer...

Answer 3

From looking at the picture you submitted it looks like you have a Coleman Mach which is what the replacement shroud part #MA00-325001 is designed to fit.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Correct Shroud Replacement for an Older Coleman AC

Featured Help Information

Miscellaneous Media

Continue Researching