Are the Capacities the Same on Both Hitch Balls on the Gen-Y Phantom X Adjustable 2-Ball Mount?

Question

Question:

Are all three if the different hook ups 2”, 2 5/16” and pintle rated at 16k or do each of them have a different rating? If so what are there ratings in each configuration?

asked by: Todd

0

Expert Reply:

Yes, they are all rated for 16,000 lbs. I checked with Gen-Y and the Phantom X Adjustable 2-Ball Mount item # GY35XR has a maximum capacity of 16,000 lbs no matter what attachment you are using.

expert reply by: Jerred H

0

Answer 1

The Gen-Y Adjustable 2-Ball Mount #GY65FR weighs a total of 49 pounds. If you are looking for something a bit lighter, I recommend the B&W Tow & Stow 2-Ball Mount - 2.5" Hitch #BWTS20037B. This hitch weighs only 31 pounds, which is…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 10

Hey Mark, the only real downside to an offset ball like the Gen-Y part #GY43XR is going to be that it costs more typically and it would take up more room when stored compared to a non-offset ball like the #C38CR. The handling and weight carrying…

view full answer...

Answer 11

Hey JB, The Firestone Ride-Rite Air Bags #F64XV are the correct airbags for your 2024 GMC Sierra AT4 trim. These are a no drill installation and bolt right up to your vehicle. With the on board compressor you can air up at any time. This kit is also…

view full answer...

Answer 12

Hey Dave, congrats on the new truck and trailer. You're definitely going to want the extra clearance an offset gooseneck ball provides with a 6-3/4' bed. The Gen-Y gooseneck pin boxes do not help with turning clearance. For your 2026 Chevy…

view full answer...

Are the Capacities the Same on Both Hitch Balls on the Gen-Y Phantom X Adjustable 2-Ball Mount?

Product Page this Question was Asked From

Continue Researching