What Round Bar Adapter Will Go With Yakima TrackTowers?

Question

Question:

I purchased the Track Towers and the SL round bar adapter and it doesnt seem like the base of the adapter kit fits, just the ring itself is screwed into the tower? What SL roundbar adapter goes with the Track Towers?

asked by: Pam

0

Expert Reply:

The Yakima RoundBar SL adapter # Y03536 will be compatible with the Yakima TrackTowers # Y52AV. Per my contact at Yakima, you will use just the ring and the M6 bolt.

expert reply by: Jesse M

0

Answer 1

Hello Jay. It sounds like you are definitely on the right track here. The TrackTowers #Y52AV and the RoundBar SL Adapters #Y03536 will definitely be your best bet for adding Yakima round bars to the T-Slots on your Retrax Tonneau Cover. The…

view full answer...

Answer 2

Yes, the TrackTowers for Yakima Crossbars and Platforms #Y52AV will fit your Thule top tracks. Are you wanting to add regular crossbars? Crossbars like the Yakima JetStream Crossbars #Y00426 will install as is. If you add HD bars, round bars, or the…

view full answer...

Answer 3

It looks like you have the TrackTowers for Yakima Crossbars and Platforms #Y52AV so you actually don't need any adapters to attach to your Yakima LockNLoad platform.

view full answer...

Answer 4

Yes, I confirmed with Yakima that the Yakima Crossbar Pads for Aero Crossbars - 30" Long - Qty 2 #Y07413 will fit on your Overhaul HD crossbars.

view full answer...

Answer 5

Installing a track system roof rack like the Yakima parts #Y01126, #Y00221, #Y8890027, and #Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we…

view full answer...

Answer 6

From the looks of your included picture, it looks like you have flush factory rails and Yakima Round crossbars for your 2022 Honda CR-V. In order to use your Yakima RoundBars, you need to first remove the factory crossbars you currently have…

view full answer...

Answer 7

The landing pad you would need is part #Y00221 which will fit your roof rack channels. For towers you need two of the part #Y00152 and a round bar adapter part #Y03536. For 58 inch crossbars you would want part #Y00409. For 78 inch long you'd…

view full answer...

Answer 8

It looks like you have the Yakima Landing Pad 1 for Yakima Control Towers #Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars #Y53TR. These towers will allow you to choose between the Jetstream #Y00426…

view full answer...

Answer 9

The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 #Y00241…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

What Round Bar Adapter Will Go With Yakima TrackTowers?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching