6-Lug Hub & Drum For 2,200 lb Timbren Axle-Less Trailer Suspension

Question

Question:

I have a Timbren 1-TON AXLE LESS SUSPENSION part# ASR1THDS03 with 5 bolt electric brake hubs part # 94550PR. I would like to convert this to 6x5.5. Will this hub fit, or can you recommend the correct parts? Thanks!

asked by: Luke S

0

Expert Reply:

Yep, your 2,200 lb Timbren Axle-Less Trailer Suspension # ASR1THDS03 is 100 percent compatible with and able ot use the 6-lug hub you asked about, which is the following part number:

- Easy Grease Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K

This hub uses the same bearings and seal that fit your Timbren system, which is why it's compatible.

expert reply by: Kyle S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

No, I am sorry we do not. The lid for the Replacement Box with LED Lid for Engager Breakaway Kit item #HM20121 will fit the 20098 Endurance Engager LED Test Break Away Kit. It's designed for the Item #20099 but they're the same size.

view full answer...

Answer 3

To replace the motor on the LCI Pump 650057 we have the Replacement Motor #LC167576.

view full answer...

Answer 4

Yep, your 2,200 lb Timbren Axle-Less Trailer Suspension #ASR1THDS03 is 100 percent compatible with and able ot use the 6-lug hub you asked about, which is the following part number: - Easy Grease Trailer Hub and Drum Assembly #AKHD-655-35-EZ-K This…

view full answer...

Answer 5

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 6

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 7

Hey there John, I can help you out with this. While we don't have the specific Bulldog inner tube for the Bulldog BX1 Gooseneck Coupler - Adjustable Height - Round - 2-5/16" Ball - 25,000 lbs #BD1289000300, but Bulldog carries it under part…

view full answer...

6-Lug Hub & Drum For 2,200 lb Timbren Axle-Less Trailer Suspension

Product Page this Question was Asked From

Continue Researching