Correct Replacement Tarp for an Extang Trifecta 2.0 Tonneau Cover on a 2016 Ford F-150

Question

Question:

Looking for a replacement cover for my extang folding cover 2016 f150 with 6 foot box thanks

asked by: Darrell N

0

Expert Reply:

If you're needing a replacement tarp for an Extang Trifecta 2.0 like the Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover # EX92635-20 you were looking at, then you'd want the Replacement Extang Trifecta 2.0 Tonneau Cover # EX92480-20 instead.

If you're needing something different let me know and I can take a look at what we have.

expert reply by: Bryce D

0

Answer 1

The Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas #EX94430 looks similar to the Extang Trifecta 2.0 Soft Tonneau Cover - Folding - Vinyl #EX92430, but the canvas doesn't have the same sheen you mentioned. It has more of a…

view full answer...

Answer 2

We have the replacement female buckles for the Extang Trifecta 2.0 with the part #EX54440100 which is what you are looking for.

view full answer...

Answer 3

We have the Replacement Tarp #EX59VJ for your Extang Trifecta Signature 2.0 Soft Tonneau Cover #EX94486. You will want to confirm this is the cover you have by looking for the number on the front drivers corner of the tarp.

view full answer...

Answer 4

None of the methods are super easy. I'd recommend three though you have to remove hinges. This is least invasive, doesn't require cutting the cover, and also doesn't risk damaging cover.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Correct Replacement Tarp for an Extang Trifecta 2.0 Tonneau Cover on a 2016 Ford F-150

Continue Researching