Can the Tongue Mounted Crossbar for Malone MicroSport Trailers Be Used on the Yakima Rack n Roll

Question

Question:

Will the tongue mounted crossbar work on yakima rack n roll 66 to carry a hobie outback?

asked by: Terry

1

Helpful Expert Reply:

The Tongue Mounted Crossbar for Malone MicroSport Trailers # MPG4002 if pretty universal since it installs via a U-Bolt so I'm fairly confident it'll work just fine with your Yakima Rack n Roll trailer.

This is designed for Malone MicroSport trailers which have a 3" x 2" tongue, so as long as your trailer has the same dimensions you'll be all set.

expert reply by: Bryce D

1

Answer 1

Hi Tom, The width is 1-1/4 inches for the bottom support bar of the Tongue Mounted Crossbar for Malone MicroSport Trailers #MPG4002.

view full answer...

Answer 2

It doesn't look like there is an option to get the 13' Malone MicroSport Trailer #MPG460G and the Tongue Mounted Crossbar #MPG4002 with 58" long crossbars instead of the 78" long crossbars unfortunately. On the bright side this…

view full answer...

Answer 3

Hey, Jim! I see that you ordered the Malone LowBed MicroSport Trailer part #MPG464-LB. I reached out to Malone and they were able to provide me with a helpful diagram of the trailer with the Retractable Tongue Kit part #MPG494 installed. The total…

view full answer...

Answer 4

The distance from the top of the trailer tongue of the Microsport trailer to the top of the #MPG4002 measures 12 inches.

view full answer...

Answer 5

The tongue on the Malone Malone MicroSport Trailer #MPG460G is 8' by itself and can be shortened using the Retractable Tongue Kit for Malone MicroSport Trailers #MPG494, which will reduce the overall length of the trailer from 13' to 9',…

view full answer...

Answer 6

Hey Scott, thanks for reaching out. So it is possible to add a second tier to your Malone MicroSport LowBed with the #MPG474 2nd Tier Kit. It bolts right on and gives you another set of 50-inch crossbars. This should only be used for lighter kayaks…

view full answer...

Answer 7

Hey Russ, The only difference between the LowBed MicroSport #MAL25FR and MicroSportXT #MPG460XT is the load bar support beams. The beams are longer for the XT giving it a taller height, whereas the low bed has shorter supports. You'd be able to…

view full answer...

Answer 8

Hey Barry, yes the lowbed coversion kit part #MAL33TR and the retractable tongue kit part #MPG494 are both a fit for the Malone Microsport Trailer part #MPG460G. What are you planning on using the Microsport for?

view full answer...

Can the Tongue Mounted Crossbar for Malone MicroSport Trailers Be Used on the Yakima Rack n Roll

Product Page this Question was Asked From

Continue Researching