Replacement 400 - 600 lb Round Spring Bars For Blue Ox Weight Distribution System

Question

Question:

I have a Blue Ox distribution hitch on my 21 Jeep Gladiator. I need an L shaped replacement torsion bar for one side. Its stamped MFG ID: 105881 BAR RATING 400-600 Pounds.

asked by: Aaron T

0

Expert Reply:

We have the exact replacement Blue Ox 400 - 600 lb round spring bars you need, at the following part number:

- Replacement Spring Bars for Blue Ox 2-Point Weight Distribution System # BLU94XR

expert reply by: Kyle S

0

Answer 1

What you're looking for is the Replacement Spring Bars for Blue Ox 2-Point Weight Distribution System #BLU64XR. These spring bars will work with any Blue Ox 2 point WDS and have the same 800 - 1,200 lb tongue weight rating you mention.

view full answer...

Answer 2

Typically what people do to mount the propane tank covers like the part #CAM40542 is to use a bungee cord like #EM06755 to secure it below the tanks. The cover has two tabs on the bottom of it that allow for the hooks of the strap to be attached to…

view full answer...

Answer 3

The Camco Cover part #CAM40565 and the base part #CAM57236 both can't install at the same time. You'd have to decide which of these two you'd want to use. Basically there isn't room in the cover for the base to also fit.

view full answer...

Answer 4

The spring locks for the Blue Ox weight distribution systems are the all the same but the attachment points are different. The only replacement option is the Replacement Spring Lock Kit for Blue Ox 2-Point Weight Distribution Hitch Head item…

view full answer...

Answer 5

Hello Chuck, thanks for reaching out. The Mfg ID number 105881 comes back as the Blue Ox 2-Point weight distribution system. For that, the correct replacement 800 lbs - 1,200 lbs spring bars are part #BLU64XR. Please confirm that your WD hitch is in…

view full answer...

Answer 6

Hi Debbie, thanks for reaching out. You are on the right track looking for a 12" drop adapter. For the amount of drop you need, the best heavy-duty option we have is the Gen-Y Adjustable 2-Ball Mount with 12" drop, part #325-GH-625. It uses…

view full answer...

Answer 7

Hey Christian! The Thetford Aqua-Magic Residence RV Toilet #TH42SE will fit the same bolts from your Bravura. This uses the standard Thetford 2-bolt pattern with 6" between mounting holes. As long as your rough-in measurement is at least…

view full answer...

Answer 8

All of the Replacement Round Spring Bars for the Fastway e2 Weight Distribution systems, #FA94-02-1099, #FA94-02-0899, and #FA94-02-0699, measure 31-1/2 inches long. The diameter of the bar at the upper end is 1.39 inches, and the inside groove…

view full answer...

Answer 9

Hey Don, yes if you have a Blue Ox weight distribution system that has a tongue weight rating of between 400 and 600 lbs that would mean the total trailer weight capacity for the system is 6,000 lbs. Since trailer tongue weight is typically between…

view full answer...

Answer 10

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

view full answer...

Answer 11

That is not normal wear for the L-Brackets on your Blue 2-Point #BLU75FR to be that worn. It looks like you have too much angle in the head, so I recommend trying to tilt the L-brackets a little to try and get the bar less on just that one edge, and…

view full answer...

Answer 12

While you can still use the Blue Ox 2-Point Weight Distribution w/ Sway Control #BLU75FR without the weight distribution bars, I recommend using a lighter set of spring bars. You can use the Replacement Spring Bars #BLU94XR with a trailer that has…

view full answer...

Replacement 400 - 600 lb Round Spring Bars For Blue Ox Weight Distribution System

Product Page this Question was Asked From

Continue Researching