Lift Kit For Crossroads 5th Wheel

Published 07/12/2023

Products Featured in This Question

Dexter Trailer Springs Over-Under Conversion Kit

(783)

$89.31

Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole

(206)

$33.64

Dexter Trailer Springs Over-Under Conversion Kit

(783)

$72.79

Correct Track Trailer Alignment and Lift Kit - Tandem Axle

(51)

$503.12

Question:

I need to lift my fifth wheel 3”-4”. 2019 crossroads volante 27’ BH Tandem axles. Bottom mount hangers are 3” wide with leaf springs width of1-3/4”. Do you make a kit to do this without cutting the existing hangers off the frame? Thanks

asked by: Stephen C

Expert Reply:

We don't make lift kits just sell them but the only way to get a lift that high is with an over/under kit which moves your trailer's leaf springs to the top of your axle and lifts your trailer approximately the same amount as your axle's diameter plus the height of the leaf spring pack. The right one will depend on what size your axle is:

- 2-3/8" Round Axle: Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00

- 3" Round Axle: Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00

A 2-3/8" axle is generally a 3,500 lb axle while a 3" is generally a 5,200 - 7,000 lb axle. If your leaf springs are already above your axle the max lift available is 2-1/4" with the Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX.

Otherwise you'd need to cut your hangers off and get taller ones, with our tallest being the Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall # E4139.