Is the Cap for the Valterra Bumper Mounted Carrier Available Separately?

Question

Question:

Can the cap be purchased separately? I lost mine on the road.

asked by: Charles P

0

Expert Reply:

The cap unfortunately is not available for replacement so if you need a new cap for your Valterra Bumper Mounted Carrier for EZ Coupler Sewer Hose Fittings and Adapters # VAL53VJ your options are to either purchase an entire new carrier or create a makeshift cap.

The opening is 5-1/2" wide so theoretically anything with the same diameter would work.

expert reply by: Bryce D

0

Answer 1

Hey Roger, The oxidation of the plastic causes this and unfortunately isn't something that you can really get a rating on from the manufacturer. It's the same as the plastic seats at an outdoor stadium. Keeping the trailer clean and out of…

view full answer...

Answer 2

The RhinoEXTREME RV Sewer Hoses w Swivel Fittings, #CAM39867 is two 10' long hoses with a compressed length of about 54" and 3" diameter. For storing these, I recommend the Valterra RV Sewer Hose Carrier that adjusts from 34" to…

view full answer...

Answer 3

Hey Rudy, it looks like in order to extend the jacks on the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Bluetooth Control #LC675817 individually when in manual mode, you need to press the "LEFT" button to extend or…

view full answer...

Answer 4

The picture you submitted looks almost identical to the Valterra RV Sewer Hose Carrier #A04-3460BK. See picture. The replacement cap would be the part #A04-0161BK that you referenced. This is designed to fit a tube that is 4-3/8 inches inner diameter…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Is the Cap for the Valterra Bumper Mounted Carrier Available Separately?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching