Recommended Hitch and Wiring Harness for a 2020 Ford Edge Titanium

Updated 06/18/2023 | Published 06/17/2023

Products Featured in This Question

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

(65)

$216.78

Curt Mounting Bracket for 4-Pole Flat Trailer Connector

(1285)

$6.33

Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K

(823)

$90.17

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(32)

$89.46

Question:

Will this work on a 2020 titanium? Also do you guys make a plug and play wiring harness?

asked by: Aaron

Expert Reply:

Yes, it will. I checked with our vendor and the etrailer Hitch item # e34AR is confirmed to fit the Titanium model of the 2020 Ford Edge. This hitch is custom fit and bolts to your Ford with included hardware.

The etrailer item # e34AR is made in the USA and weighs 38 lbs. It is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600 lbs maximum tongue weight.

To add a plug in wiring harness to your Ford Edge Titanium, you will need the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C73FR. This custom fit harness plugs into existing wiring behind your rear tail lights.

I recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your hitch. This will put it in an easy to reach spot and prevent the risk of it falling onto the road.

To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop. It also includes a hitch pin and clip, hitch receiver lock with keys, hitch cover, and a storage case.

If the plug and play wiring harness you are looking for is for a brake controller, then the answer is no. There are no plug in ones. Just ones that have to be hardwired depending on which brake controller you're interested in.