Reverse Solenoid For Titan Model 10 Surgo-Matic
Updated 06/16/2023 | Published 06/15/2023
Products Featured in This Question
Question:
I have a boat trailer with the surgomatic 10 installed. do you sell a by pass for using the trailer in reverse? i see the one with wiring but is there any other by pass option, thx
asked by: Jeff
0
Expert Reply:
You would need the wired reverse solenoid for your Titan Model 10 Surg-O-Matic, as there is not another option. So the correct part is the Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts # T4748800.
If your Model 10 is from the year 2000 or older you'll also need the Solenoid Adapter Fitting # T4750200.
expert reply by:
Kyle S
0
Product Page this Question was Asked From
Replacement Solenoid Adapter Fitting for Dexter Model 10 Brake Actuators Made Before 2010
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Solenoid
- Adapters
- Dexter
more information >
Continue Researching
- Q&A: What Connectors are on Either Side of DeeMaxx Hydraulic Brake Line # DE99NR
- Q&A: Is Replacement Adapter Port for DeeMaxx Disc Brake Calipers # DE73MR Exact Replacement Part
- Q&A: Is There an Adapter To Let The DeeMaxx Disc Brake Calipers Accept a Banjo Bolt?
- Q&A: Recommended Brake Line Kit for a Triple Axle EZ Loader Boat Trailer
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Q&A: Replacement Master Cylinder for Titan Model 10 Actuator
- Q&A: Replacement Inner Member for a Dexter Model A60/A75/XR84 Brake Actuator
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Trailer Lighting Requirements
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Gooseneck to 5th Wheel Adapters