Is 1-1/2 Square Trailer U-Bolts # SP01-120 Galvanized
Updated 05/31/2023 | Published 05/30/2023
Question:
Are these ubolts galvanized? #SP01-120
asked by: Keith M
0
Expert Reply:
The 1-1/2" Square Trailer U-Bolts # SP01-120 is not galvanized and we don't have any in this size that are.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
1-1/2" Square Trailer U-Bolts (Qty 2)
- Trailer Suspension Parts
- U-Bolts
- Camper
- Car Hauler
- Utility Trailer
- 3500 lbs
- Square Axle - 1-1/2 Inch
- 1/2 Inch Diameter
- 5 Inch Long
- Redline
more information >
Continue Researching
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Shop: Brake Controller
- Shop: U-Bolt Plate for 1-1/2" Square Trailer Axles with 1-3/4" Wide Springs
- Shop: 1-1/2" Square Trailer U-Bolts (Qty 2)
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Should Hole be Drilled in Axle for Leaf Spring with Center Bolt to Fit Properly
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: leaf spring hanger
- Search Results: leaf spring strap
- Search Results: leaf spring shackles
- Search Results: leaf spring hanger kit
- Search Results: leaf spring hangers
- Search Results: grease seal 10~19
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: Detailed Breakdown of the etrailer Electric Trailer Brakes
- Video: Let’s Check Out the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles
- Q&A: How to Determine the Capacity of Trailer Leaf Springs and How to Raise the Coupler Height
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Upgrading Leaf Springs on a Trailer with a 3500 Pound Axle
- Q&A: Can 26 Inch 3,500 lb Leaf Springs be Replaced With 4,000 lb Leaf Springs
- Q&A: How Tight Should Shackle Straps and Bolts Be Tightened On Trailer
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: U-Bolt Plate for 1-3/4" Square Trailer Axles with 1-3/4" Wide Springs
- Shop: Replacement U-Bolt for 1-1/2" Wide, Square Trailer Axles - 1/2" Diameter - Raw Finish
- Search Results: 5 lug hub