Can A Slide Out Have Both An RV Awning And Slide Topper Awning On It  

We've had this question before and when asked about this Solera has informed us that in order for a slide topper to fit with an awning there needs to be at least 7 inches between the awning and the slide out. If you can let me know the width of…

Thanks for that photo it was super helpful, and let's start with the easiest thing first, which is the 3 inches of clearance you have on the sides. Since slide toppers need 7 inches of clearance on the sides, what you will need to do is order the…

In order to determine if there is space for both a slide topper and standard awning on your 2020 Grand Design Reflection 303RLS you will need to have at least 3" from the inside of the flange on the side of the slide to the outside of the…

Thanks for the question! When adding a slide topper there are time we can put these on a camper that has an awning already on the slide and times that we can't. In your case there isn't the 4" of room we would need to put it on. The…

It's not uncommon to have a slide topper installed below the awning of the RV if the awning happens to be over the slide out. As long as you have room for a rail to fit under the main awning rail this would be totally fine. To pick out the…

Since you need 6 inches of clearance and only have 2.75 inches, there's no reason you couldn't simply use the shorter, 7 foot slide topper #LCV000168105. The trade-off, as you're undoubtedly aware, is that the 7 foot topper is not going…

The Furrion Arctic RV Refrigerator with French Doors - Black Glass #FR42PJ does come in stainless steel with part #FR62PJ. While running this refrigerator can pull 11 amps per hour with an estimated 1.8kWh per day. That being said, there are a lot of…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

When installing an awning like the Solera Smart Arm 12V Power RV Awning #LC517486, the arms will be secured to the wall framing. When the awning extends there will be quite a bit of leverage, so it is important to mount the awning to an area where…