Replacement Hub/Drum for Aluma Enclosed Trailer
Updated 05/03/2023 | Published 05/02/2023
Question:
Need a spare trailer hub complete with bearings and seal for easier road side emergency change - for a 2006 7 x 12 single axle Aluma enclosed trailer .....Dexter axle # 69-47 on suspension arm casting....5 stud 4.3 spread.....wheel/tire is a 215/75R14
asked by: Scott D
Expert Reply:
Based on the info you listed it sounds like you have a 3,500 lb trailer axle and your wheels have a 5 on 4-1/2 inch bolt pattern so for a replacement hub/drum that is pre-greased and ready to install if needed you would wan the Easy Grease Hub part # AKHD-545-35-EZ-K and you'd be set.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Suspension Enhancement Recommendation for Trailer with Dexter 2,000 lb Axles
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can I Add Electric Brakes To A 1993 EZ Loader Boat Trailer