How To Determine The Correct SnapPads For 2023 Airstream Pottery Barn Edition Travel Trailer

Question

Question:

SnapPad XTRA Square 5Jack Pads for Lippert Leveling Systems - 5-1/2 Square Feet - Qty 4 Will this work on an Airstream 2023 pottery barn edition?

asked by: Douglas N

0

Expert Reply:

The size of the jack pads for your 2023 Airstream aren't listed so the only way to know for sure would be to measure their diameter. The SnapPad XTRA Square 5Jack Pads for Lippert Leveling Systems # SN68FR are for 5-1/2" square feet. If yours differ in size then let me know and I'd be happy to find the correct fit.

expert reply by: Kevin C

0

SnapPad Leveling System Fitment
(click to enlarge)

Doug R.

3/13/2024

What is the difference between 5 1/2” mini and a 5 1/2” xtra? Trying to put on 2023 Globetrotter and the square foot is 5 1/2”. Thanks!

Kevin C.

3/14/2024

@DougR SnapPad differentiates it's pads by name (Mini, Xtra, EQ, etc.) as they've tested each line with specific leveling systems and jacks. The Xtra line has been confirmed to work with LCI/Lippert leveling systems and the Mini line is confirmed to work with BAL, Bigfoot, and other jacks. I'm going to attach a picture above in the answer that lists each line and their compatible leveling systems. Realistically both are going to fit but one should be a slightly snugger fit. Check the brand of your system and then you can choose from whichever line matches.

Answer 1

The Replacement Pad for SnapPad Jack Stand Pad System - 5-1/2" Square Jack Foot #SN67FR will fit any brand foot as long as it is square and 5-1/2" x 5-1/2".

view full answer...

Answer 2

If you have valve stems with a metal body like the Americana Metal, Bolt-In Valve Stem part #AM20906 then you will want to use flow-through sensors but if you have valve stems with a rubber body like the Americana Rubber, Snap-In Valve Stem part…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

How To Determine The Correct SnapPads For 2023 Airstream Pottery Barn Edition Travel Trailer

Product Page this Question was Asked From

Continue Researching