Hitch for Grand Design Reflection 150 Series for Carrying Draw Tite Spare Carrier

Question

Question:

Hello, I have a Grand Design Reflection 150 Series model 280RS 5th wheel with a rear 2inch trailer receiver. Id like to use the Draw-Tite Spare Tire Carrier - 6715 in the rear hitch to carry a spare tire for 5th wheel. The tire lug pattern is 6 on 5.5inch for a Goodyear ST225/75R15. I wanted the one-peice design of this model and the vertical, non-tilted design so there is no possibility of hitting my 5th wheel rear wall from the angle of the spare tire. Will this carrier work for the lug pattern and application above? thanks

asked by: Rob T

1

Helpful Expert Reply:

The Draw Tite hitch mounted spare carrier part # 6715 would work great for you. It is compatible with the wheel bolt pattern you have of 6 on 5-1/2 inch and can be used in the hitch of your Grand Design Reflection.

expert reply by: Jameson C

1

Answer 1

Curt has verified that their front hitch part #C31089 that you referenced fits all models of the 2020 Ram 2500 including the diesel models.

view full answer...

Answer 2

The Draw-Tite Front Mount Trailer Hitch Receiver #65063 referenced in your question is a great option and is confirmed to fit your 2013 Dodge Ram 2500. I have included the installation details for you to review. Anytime you place something in front…

view full answer...

Answer 3

A 3,000 lb jack would be able to lift a 5,000 lb trailer since the jack would basically only be lifting half of the trailer weight since the other half is supported by the wheel on the other side. I think bare minimum you'd need a 2,500 lb jack…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Chris, Our Fitguide can be a bit confusing sometimes. Essentially the whole category is broken down into whether they fit diesel or non-diesel models. Since the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR fits both gas and diesel…

view full answer...

Answer 6

Yes, it will Mike! The EcoHitch Hidden Front Mount Trailer Hitch item #EH54QR is exactly what you need for your 2024 Ford F-350 dually. This hitch is specifically designed to fit the dually models. It has a 2" receiver with a 1,000 lbs vertical…

view full answer...

Answer 7

Hey Vicky! Yes, the Meyer HomePlow Residential Hydraulic Snowplow #ME53FR includes the wired pistol grip controller. See the attached picture. You can use the plow on your 2003 Silverado as long as you have a front hitch with a 2" receiver.

view full answer...

Answer 8

Hi Robert! The EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH37FR will indeed fit your 2026 Ram 3500 diesel Mega Cab Laramie edition. I confirmed this with EcoHitch and we actually have a review from another person that…

view full answer...

Answer 9

For your 2021 Ram 2500, the hitch that offers the greatest amount of ground clearance would be the EcoHitch #EH37FR which is compatible with both Diesel and gas engine Ram 2500 models. Since the hitch receiver will be partially blocked by the license…

view full answer...

Answer 10

The placement of the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR will not restrict air flow into your intercooler or void your warranty on your 2022 Ram 3500. The area the receiver mounts is also the same area the front license plate…

view full answer...

Answer 11

Hey Charles, when we installed the EcoHitch part #EH87SR we found that the hitch sits basically at the exact same height as the air dam under the bumper like you see in the attached picture. So if you wanted to know how high the hitch would sit you…

view full answer...