Replacement Remote For a HappiJac Electric Camper Jack System

Updated 06/24/2025 | Published 02/22/2023

Question:

Need to replace the remote on my Happijac system , jack # 4560, Lippert control box # 13398-C2 number on outside of remote is 116128 IDS, Inc. and 1121500079 inside sticker beneath battery box for remote 1122500189 and 11138H thanks

asked by: Doug S

Expert Reply:

We have 2 different remotes available for HappiJac electric camper jack systems.

- Replacement Remote Control for HappiJac Electric Camper Jack Systems # LC723915
- Replacement Remote Controller for Wireless HappiJac Electric Truck Camper Jacks # HJ54ZR

The Replacement Remote Controller for Wireless HappiJac Electric Truck Camper Jacks # HJ54ZR works for all wireless HappiJac truck camper jack systems. So if your remote is currently wireless this would be the correct option.

More than likely you will want the Replacement Remote Control for HappiJac Electric Camper Jack Systems # LC723915. I tried locating the remote with the numbers you provided, but was unable to do so. However, the kits needed to convert the 4560 to a system that use a remote both use the # LC723915 remote.

expert reply by: Scott S

Tom

6/23/2025

I’ve replaced my happijac cord controlled system with the wireless. It seems the are not communicating. Orange light Comes on. Can’t get the controller light to turn green with remote. I can get ti to go green if I reboot power. But still won’t operate jacks, and will time out and orange light comes back on. Equipment was purchased about 5 days ago And all came in one box.

Jameson C.

6/24/2025

@Tom There's a process to pairing the remote which it sounds like you need to do: You must use the phone cord to connect the remote to the receiver either directly or through a remote plug in provided by your manufacture. once plugged in you Simultaneously press and release the all up and Down buttons (5&6) on the remote. The green light on the remote should turn on. Then press button 8, Five times. Then press button 0, Five times. Then Simultaneously press and release the "ACC IN and Out" buttons once. Disconnect the cord. The remote should now work