bing tracking image
  1. Truck Camper Tie Downs
  2. TorkLift
  3. Frame-Mounted
  4. Front Tie-Downs
  5. Custom Fit
  6. Powder Coated Steel
THIS ITEM IS NOT A FIT FOR
2026 Toyota Tacoma
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
TorkLift

TorkLift Truck Camper Tie-Downs - Custom Frame Mount - Front and Rear

Part Number: TL27FV
In Stock
$948.25
Truck Camper Tie Downs
Not Confirmed to Fit

2026 Toyota Tacoma

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
These custom fit tie-downs give you the safest and most comfortable ride when hauling a camper. They mount to the frame of your pickup - no drilling required! With the arms removed, the brackets can barely be seen. Great Prices for the best truck camper tie downs from TorkLift. TorkLift Truck Camper Tie-Downs - Custom Frame Mount - Front and Rear part number TL27FV can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (924)
  • Q & A (0)
  • Videos (3)
  • Photos

TorkLift Truck Camper Tie Downs - TL27FV

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Damage-Free Install: Bolts to existing frame holes so there’s little to no drilling needed.
  • Stable, Safe Ride: Frame-mount design lowers camper weight for better handling and less sway.
  • Clean Look When Unloaded: Remove arms and brackets stay nearly invisible under your truck.
  • Strong, Lasting Build: Steel construction with a high-impact powder coat fights rust and wear.
  • Flexible Turnbuckle Setup: Two anchor holes let you adjust reach and angle for a solid hold.
Made in USA

Features to know about

Stable Handling on Every Mile: Frame-Mounted Strength

These custom-fit tie-downs mount directly to the truck’s frame—the strongest point of the vehicle—for a secure, balanced ride. By anchoring to the frame instead of the bed or bumper, the camper’s weight is spread evenly and kept low for better handling and less sway in crosswinds. This setup prevents that top-heavy feel and keeps both your truck and camper stable even on long trips or rough roads.

Clean Look When Unloaded: Low-Profile Design

When the camper’s off, you can remove the tie-down arms and the brackets will hardly be visible beneath the vehicle. The frame-mounted design tucks the hardware close to your truck so you keep ground clearance and a clean look. It’s a simple way to haul when you need to and keep things looking stock when you don’t.

TorkLift frame-mounted camper tie-downs installed beneath a pickup truck, showing how the brackets remain nearly hidden for a clean appearance.

Easy Install Without Drilling: Custom Fit Mounts

Each tie-down bolts to pre-existing holes in the frame, so there’s little to no drilling required. The bolt-on design keeps your frame intact and makes setup straightforward with standard tools. Because they mount tight against the frame, you also keep nearly all of your clearance—no bulky parts hanging low or catching on uneven ground.

Built for Real Use: Powder-Coated Steel Construction

The steel construction gives these tie-downs the strength needed for heavy campers and long hauls, while a high-impact powder coat finish adds protection from corrosion and wear. That durable coating keeps rust at bay through wet weather, salt, and dirt so your tie-downs stay strong season after season.

Secure Connection Options: Adjustable Anchor Points

Each arm has two pin holes for adjusting how far it extends from the truck body, giving you space to clear fenders or sidewalls. The attachment plate also offers two anchor holes so you can find the best angle for your turnbuckles (sold separately). That flexibility helps keep tension even and prevents shifting once everything’s tightened down.

Close-up view of a TorkLift tie-down with a turnbuckle attached, demonstrating how the camper is secured to the truck frame.

Specs

Construction

  • Material: Steel
  • Finish: High-impact powder coat

Installation

  • Mounting location: Frame-mounted
  • Drilling required: Uses pre-existing holes in the frame - little to no drilling required
  • Fit type: Custom fit
  • Ground clearance: Mounts tight to your vehicle’s frame - minimal loss of ground clearance

Included Components

  • Included: 2 front tie-downs, 2 rear tie-downs, installation hardware
  • Turnbuckles: Required, sold separately

Features

  • Secures your camper to your truck bed: Ensures excellent handling
  • Distributes camper weight evenly and lowers the center of gravity: Avoids top-heavy setup vulnerable to winds and sway
  • Remains virtually invisible beneath vehicle when arms are removed: Adjustable arms extend to clear bowed sidewalls and fenders
  • Two anchor holes: For turnbuckles

Diagram showing proper placement of camper tie-downs and anchor points on a truck, illustrating correct offset positioning for secure installation.

Warranty

  • Warranty: Lifetime
  • Country of manufacture: USA

F4006 Tork Lift Truck Camper Tie Down - Front Frame Mount - Custom Fit

R3503 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit





Video of TorkLift Truck Camper Tie-Downs - Custom Frame Mount - Front and Rear
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for The Low-Down on the TorkLift Tie Downs-TL23DR

Speaker 1: Today we're going to be taking a look at the TorkLift custom frame mounted camper tie-downs for the rear of the vehicle. This product fits many vehicles so to ensure that this is a fit for your vehicle, you can use the vehicle fit guide located at etrailer.com. These tie-downs provide attachment points at the rear of your truck bed for securing a bed mounted camper. Front tie-downs are sold separately and available at etrailer.com. The frame mounted design ensures excellent handling, so securing the camper to the truck's frame instead of its bed better distributes weight, which keeps the setup from being too top heavy.When they are not being used, the system is virtually undetectable. All you have to do when they're not being used is you can actually remove the arms and get them out of the way.

Now, I also want to point out that these arms have two pin holes in them so that way you can adjust it to whatever one fits best for your application. Once you have this setting achieved, you simply slide through the included pin and secure its clip on the other side. The tie-down inserts again can be easily removed from the frame mounted receiver brackets when they are not being used.The other thing I want to point out is that these brackets are custom fit for your vehicle. So these brackets are designed to fit tight to the truck frame. That way there's not a loss of ground clearance.

They're made from a nice, durable steel construction and they feature a black powder-coated finish on them, so they're going to do a great job at resisting rust and corrosion. It does come with your tie-down inserts, the custom frame brackets and the pins and clips. You will use your existing hardware on the vehicle frame. It also comes with a set of detailed installation instructions to help walk you through that whole process step-by-step. This product is made in the USA and covered with a lifetime warranty.That's going to do it for today's look at the TorkLift custom frame mounted camper tie-downs for the rear of the vehicle..

Ratings & Reviews

4.7

924 reviews
5 Stars
(747)
4 Stars
(103)
3 Stars
(32)
2 Stars
(18)
1 Star
(24)
Review Sort Icon
by:
by:
After selling previous truck camper and getting a new truck these tie downs are outstanding. The direct fit for year make model is awesome. Takes the guess work out installation. The install instructions were really good as well as etrailers videos. etrailer is the great providing product install walk thru. The adjustability of these tie downs made my life easier when I picked up my new TLRV 8 foot truck camper.
Straw profile picture

Straw

8/24/2026

A year later, no issues with tie downs, except normal wear and tear and metal to metal wearrust progression. These tiedowns are designed great and fit function was clearly created by someone who knows not only design but install ! E-trailer is “the” place to buy rv, camper, towing etc products - the install videos are sooooo helpful ! Thx ET !

Lazer S. profile picture
Etrailer Expert

Lazer S.

8/24/2026

@Straw Glad to hear they are still working well for you! And thanks for your kind words! ^___^ What had been your favorite spot to take your rig so far?
by:
This is the only way the tie downs fit is this a safe way to strap it down
Lazer S. profile picture
Etrailer Expert

Lazer S.

9/16/2025

It definitely is safe the way you have them, Paul! In a perfect world, the turn buckles would be perfect vertical, but this an imperfect world and not all campers have the attachment points in the same place. If you take a look at some of the installed pictures on the TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK page, you can see most of them are at an angle. It's perfectly normal. Are you running any suspension enhancement on your Silverado?

Paul profile picture

Paul

9/27/2026

These tie downs are great, so easy to use. Camper never budged a hair

Andrew N. profile picture
Etrailer Expert

Andrew N.

9/27/2026

@Paul That's what we like to hear! Torklift makes some really solid parts. That camper looks really good on that truck!
by:
2018 Ford F-150
I ordered this kit for my 2018 Ford F150 'Heavy Half' regular cab, long bed pickup. The tie downs came with all the necessary hardware, good instructions, were easy to install with basic tools, and required no drilling. Shipping was very fast. I would absolutely recommend TorkLift tie downs and etrailer.com.
Bob profile picture

Bob

11/1/2025

I have not had any issues at all with the tie downs.

by:
2024 Ford F-250 Super Duty
They seem stout and were easy enough to install. I added my own 2” square rubber caps to the ends to keep road debris out when they’re not in use, those should be included. For $850 the packaging could use some work. They arrived all banged up, the “high impact powder coat” is worn off in several areas leaving bare steel exposed.
Kate F. profile picture
Etrailer Expert

Kate F.

8/10/2026

Thanks for the pictures Rich. We will be reaching out =)

by:
2019 Ram 3500
Product arrived quickly and install was simple with supplied parts, instructions and tools.
Heather A. profile picture
Etrailer Expert

Heather A.

4/10/2026

Looks great! What kind of camper do you have?

by:
2006 Ford F-250 Super Duty
I did a lot of research to find the right kind of frame mounts for my dads truck. Lots of local RV places didn't even know what I was looking for, or quoted me for the wrong parts. After I was certain I found the right tie downs, I contacted etrailer customer service chat representative and they were a great help at confirming the parts I found would in fact fit my dads truck. My husband and dad installed them in less than 2 hours. The parts came quickly and in excellent packaging/condition.
Lazer S. profile picture
Etrailer Expert

Lazer S.

10/14/2025

Install looks great, Megan! Especially for it only taking two hours! They were moving. : ) Happy we confirmed what you found as well. Tie downs can be a pain in the rear with all the options out there. Now I do have to ask though, have you guys thought about any kind of suspension enhancement for the rear axle? It's a little hard to tell, but it looks like the back is sagging a bit in your last picture.

Megan profile picture

Megan

10/14/2025

@LazerS Thanks for the reply! The truck is currently stock, but we are getting airbags and new shocks placed on the truck tomorrow. We were told by our local 4 wheel parts the airbags will help lessen the load on the back of the truck with the weight of the camper. Hopefully they gave us the correct information. If you have other suggestions, I am open to hearing them! Thanks!
Lazer S. profile picture
Etrailer Expert

Lazer S.

10/14/2025

@Megan Air bags are what I was going to recommend! Great minds think alike. : ) With them being fully adjustable, they are definitely the way to go. They can change the unloaded ride a little, but not nearly as much as some other ways of doing it that are not adjustable. Sounds like you guys are doing everything right to me. Let me know how it goes!
by:
Scion tC
Absolutely the only way to correctly attach your truck camper. Pair these white Fastguns and it’s a great combo. I just went on a 5000 mile trip with my TC and never moved an inch.
Clay profile picture

Clay

7/31/2026

A year later and I would not do anything different. Absolutely the best system available especially paired with the fast guns. The camper is solid mounted and does not move. Yet can still be off loaded in just a few minutes. Remember good stuff isn’t cheap and cheap stuff isn’t good.

Christopher H. profile picture
Etrailer Expert

Christopher H.

7/31/2026

@Clay Happy to hear the # TL86NR are working well and keeping your setup solid. Paired with the fast gun turnbuckles is about as good as it gets. What type of in bed camper do you have?
by:
1996 Ford F-250 and F-350
Really disappointed for the cost. First of all it says several times in the description that it requires no drilling. That’s not the case at all. I had to drill 12 holes in my truck frame. The bolts included for the top mounting bracket were the incorrect length so I had to purchase longer grade eight bolts to install as suggested by the manufacturer with a lock washer and nut. The cheaped out on spacers (like shown in the directions) and included huge washers and to top it off the slide in mounts were all scraped up and have peeling powder coating. I feel like I got absolutely ripped off.
by:
2017 Ford F-250 Super Duty
Overall great product and the installation isn’t terribly difficult. Only gripe is after spending $900 I was shorted 2 of the 1/4” pins. Had to use a bolt and nut to hold the tie down into the receiver to get my new camper home. Not the end of the world just disappointing
by:
2019 Ram 2500
These things are heavy duty. Straightforward installation, just follow the instructions and videos. Fit like a glove and are rock solid. Thanks etrailer for fast shipping and Torklift for great products.
by:
1996 dodge Ram Pickup
Fit perfectly on my 96 Dodge Ram 2500. I recommend this product.
by:
This kit is a solid support system, very beefy. The tie down points on your camper will get ripped out before this would fail.
Nick S. profile picture
Etrailer Expert

Nick S.

1/12/2026

I love these TorkLift tie downs, and it is great to hear you are liking the quality as well. What kind of truck camper are you going to be running with these?

by:
great fit, works great, strong parts, works perfect! etrailer was excellent in making sure I received the correct parts. I highly recommend etrailer, if in doubt, call them, don't try and wing it, they will set you up with the correct parts! I will use etrailer again!
Kate F. profile picture
Etrailer Expert

Kate F.

8/20/2026

We appreciate the kind words Charles! Where did you take the in-bed camper for the first trip?

by:
2011 Chevrolet Silverado
We had a hiccup with my order and it was lost in cyberspace for a day until I called and was able to get it going. Unfortunately, I needed them by Saturday and I ordered them Wednesday. They didn't ship until Thursday afternoon and didn't arrive until Monday. The seller of the camper was kind enough to hold the camper for me, but it was touch and go there for a while.
Installing them was a challenging because the pictures in the guide were difficult to see which slowed the installation down a little. It took 2 of us about 3 hours to install them. Now that they are on the truck with the camper they seem to be working great! The only problem remaining is the front tie downs use a bolt to hold the tie down to the frame and it obstructs the passage, so it will only advance as far as the first pin making the second hole unreachable (it sticks out from the truck a few extra inches and makes the extension wobble up and down until the turnbuckle was installed).
by:
2021 Ford F-250 Super Duty
Not a good experience so far. Torklift product was defective and they sent the wrong size bolt fish wires. Took 3x as long to install as should have due to wrong size fish wires. Torklift is not very responsive on the solution to the defective part. Torklift did not drill one of the holes in the tie downs
by:
Ordered for 2025 GMC 3500HD to carry our Arctic Fox slide in camper. Kits were shipped right away and arrived in Anchorage in 5 days (as ordered). The tie downs are excellent quality, all hardware arrived with the kit, instructions were "OK", installation on rear tie downs a little tricky, but managed to do ourselves. Looking forward to some great camping adventures. Thanks for the GREAT service!
by:
2024 GMC Sierra 2500
I would say that the Torklift kit fit my 2024 GMC sierra pro crew cab perfectly the shipping to Canada took 5 days which I thought was fast delivery and it shipped the same day it was ordered
by:
2027 Ford F-350 Super Duty
The product itself is GREAT and fits PERFECTLY. I'd give 5-stars if packaged properly to ensure the paint stayed whole as it left the factory. Instead some of the metal pieces showed up dinged and now will rust prematurely. Customer service is always solid with etrailer.
by:
The camper tie downs are still working great.
by:
2016 dodge Ram Pickup
Second set of Torklift camper tiedown brackets I have purchased. 1999 Dodge 2500 and 2016 Ram 3500. Fit good. No drilling. I would buy again. Good product. (I am a certified ASME, AWS, API, welder and fabricator). No hype, just fact.
by:
Relatively easy to install with instructions and perform well. Quick to remove and put on as well.
by:
Absolutely fit like a glove on our Ram truck. Disconnecting the emg. break was a challenge only because the tension nut was rusted. Other than that install was a breeze.
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

9/18/2025

Install looks great, Dale! Where're you headed off to now?

Dale C. profile picture

Dale C.

9/30/2025

@GwendolynY Local travel testing it out then heading west in the spring, Getting everything setup and ready then put away for winter!!
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

10/1/2025

@DaleC Now the anticipation for Spring begins!
by:
2026 Ram 3500
Order the kit. This is the second set I have ordered in the last few months. etrailer ships fast and makes sure you can track your shipments. Also notifies you every step of the way. I appreciate the follow through with keeping me informed at when my package will arrive. I tried to buy these direct from the manufacture but they wanted more than etrailer and I had to find back and front sets. They did not sell them in kits.

Also glad the etrailer doesn't play the game of shipping in the lower 48 states only BS, there are 50 official states ins the USA (51 if your counting Alberta)! Plus numerous US territories...
by:
2023 Ram 2500
With the exception of removing the emergency brake lines. I could have done this job of mounting the front and rear mounts in under two hours, instead of three. Excellent design and looks great!
Kate F. profile picture
Etrailer Expert

Kate F.

6/5/2026

I am happy to see you went with the best ThatDennis =) Have you been able to get out for your first trip?

25
924
true
Show More Reviews

See what our Experts say about this TorkLift Truck Camper Tie Downs


Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Amanda K
Updated by:
Amanda K
Employee Dustin K
Video Edited:
Dustin K

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924