Is There Room to Open the Tailgate with the B&W Continuum Weight Distribution System
Updated 03/12/2024 | Published 02/09/2023 >
Products Featured in This Question
Question:
Info says there will be clearance enough to open tailgate and it dose not look like it. What is the differance in the product of underslung model and the standard what parts are different
asked by: David
Expert Reply:
The B&W Continuum Weight Distribution System part # BW78FR won't allow for the tailgate to open fully as it ships. In order for this to happen you'd need to switch out the shank for a longer option which is still currently being developed and tested by B&W. That said, you could still open the tailgate most of the way as is you would just need to be careful resting it on the jack but this can vary from trailer to trailer
In regards to the B&W Continuum Weight Distribution System part # BW88FR, this is designed for models with an underslung coupler meaning the coupler is mounted on the bottom of the frame and not on top which is what the above model is for and most common.
Product Page this Question was Asked From
B&W Continuum Weight Distribution System w/ Sway Control for 2" Hitch - 16K GTW, 1.6K TW
- Weight Distribution Hitch
- WD With Sway Control
- Hydraulic System
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- 1500 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- B and W
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: b&w continuum
- Video: A Closer Look at the Trailer Valet Electric Tongue Jack with Digital Tongue Weight Scale
- Search Results: tongue jack
- Shop: B&W Digital Tongue Weight Scale w/ LED Screen
- Shop: B&W Continuum Weight Distribution System w/ Sway Control for 2" Hitch - 16K GTW, 1.6K TW
- Shop: Trailer Valet Electric Tongue Jack with Digital Tongue Weight Scale - 3.5K
- Shop: B&W Continuum Weight Distribution w Sway Control and Long Shank - 16K GTW, 1.6K TW
- Shop: Replacement Socket for Stromberg Carlson Leveling Scissor Jack Set with 30" Lift
- Shop: Transmission Cooler
- Q&A: Is there a Longer Weight Distribution Shank for a B&W Continuum?
- Shop: etrailer Electric Trailer Jack - Drop Leg - A-Frame - 18" Lift - 3,500 lbs
- Shop: Dual Pin Lock for B&W Tow & Stow Pintle Mount or Continuum Weight Distribution Hitches
- Q&A: What is Difference Between Overslung and Underslung Trailer Coupler
- Q&A: Will B&W Continuum Weight Distribution System Work with Center Frame Piece on Trailer Tongue
- Q&A: Comparing B&W Continuum And Reese Strait-Line Weight Distribution Systems
- Q&A: How Does Sway Control Work on B&W Continuum Weight Distribution System 1,600 Lbs
- Search Results: tongue scale
- Q&A: Will the B&W Continuum Weight Distribution System Work with Shocker Air Equalizer
- Q&A: Recommended Weight Distribution System for a Grand Design Momentum 31G Toy Hauler
- Video: B&W Continuum Weight Distribution System Review
- Search Results: weigh safe
- Search Results: continuum
- Search Results: tongue weight scale
- Article: How to Measure for Trailer Hitch Drop
- Video: An In-Depth Look at the EZ Coupler Cap for RV Waste Valve w/ Handle and Gray Water Drain
- Video: B&W Gooseneck Trailer Hitch Installation - 2004 Chevrolet Silverado
- Video: Enclosed Cargo Trailer License Plate Holder, Plastic Review
- Shop: Vehicle Tow Bar Wiring
- Video: Buyers Products Class 4 Trailer Safety Chain with 1 Clevis Hook Review 337BSC3835
- Video: Comprehensive Review: B and B Tow Plug and Safety Chain Holder


Jim D.
3/11/2024
This question is in response to a reply from Connor L regarding a longer shank for the B&W Continuum that is in development and testing. Do know if there is a release date that you know of yet?? Very interested in purchasing.. Thanks Jim