Curt 4-Way Trailer Wiring Harness For 2023 Honda CR-V

Question

Question:

What is the part number for the curt wiring harness for a 2023 honda crv ?

asked by: Roy F

0

Expert Reply:

I verified directly with Curt for you that the correct 4-way wiring harness is following:

- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56370

expert reply by: Kyle S

0

Answer 1

I recommend going with a cargo carrier with a 2 inch shank because it will be the best fit with the least amount of movement between the carrier shank and the hitch receiver. So between the 2 you are looking at that would be #6502. You could go with…

view full answer...

Answer 2

In terms of the warranty, there is a federal law called the Magnusson-Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications…

view full answer...

Answer 3

Yes, the Curt hitch part #C13397 is a confirmed fit for the 2022 Honda CR-V. If you needed trailer wiring the Tekonsha kit part #118741 is a fit and installs easily. I attached install videos for both of these for you to check out as well.

view full answer...

Answer 4

There are indeed two 2" trailer hitches available for your 2020 Honda CR-V; the etrailer #e98848 and the Curt #C13397. These Class III hitches are essentially identical in every way except for the finish/powder coat that they use. I personally…

view full answer...

Answer 5

The Curt Hitch part #C13397 is also a fit for your 2022 Honda CR-V and is a very similar to design to the EcoHitch that fits your vehicle #306-X7345 with same weight capacity but at a better price point. This would work great with a bike rack like…

view full answer...

Answer 6

From the sounds of your question, I assume you are talking about the Hollywood Racks Sport Rider SE #HLY84FR. If this is the rack you are referring to, yes! It works with 20" diameter tires as long as you have the adapter #HLY24FR for each bike.…

view full answer...

Answer 7

The Hollywood Rack E-Bike rack part #HLY84FR can be used with the 2 bike add on part #HR1475Z and you'd have a 4 bike carrier with the inside two bike cradles having an 80 lb per bike capacity. This would be a really great option and is actually…

view full answer...

Answer 8

As of right now there aren't any bike racks which work like that so your best solution is to use a frame hitch mount bike rack an adapter bar like part #TH982XT for the Townie 5i and then the Thule Carbon Bike Frame Protector #TH984101 for your…

view full answer...

Answer 9

I have a bike rack solution for you. If your Rad Rover and Rad Runner Plus is too heavy to mount on the 65-pound per-bike maximum weight capacity of the Thule EasyFold XT Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches #TH903202, we…

view full answer...

Answer 10

The Hollywood Racks Destination Bike Rack #HLY94FR can support up to 35 lb bikes so since you're needing to carry E-Bikes you need the Hollywood Racks Destination E Bike Rack #HLY66ZR instead, which is rated for up to 70 lb bikes. I know the…

view full answer...

Answer 11

In order to use the Hollywood Racks Sport Rider SE #HLY84FR with your Lectric Step Thru Bikes, you likely will need to use an adapter bar #HRBA-PRO. This way the hooks will have something to connect to. Otherwise the hooks would not go low enough to…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Curt 4-Way Trailer Wiring Harness For 2023 Honda CR-V

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching