Recommended Bearing Kit for a 2012 Forest River R-Pod 177
Published 01/22/2023 >
Products Featured in This Question
Question:
I need a wheel bearing kit for my 2012 forest river R pod 177 I think I found the right one on your website BK 1–150 Just want to verify that this is correct.
asked by: Rob L
Expert Reply:
For your 2012 Forest River R-Pod 177 the correct bearing kit is item # BK2-100. This kit is for a Lippert 4,400 lbs axle and includes inner bearing item # L68149, inner race item # L68111, outer bearing item # L44649, outer race item # L44610, grease seal item # 58846, and a cotter pin and a tang washer. You will need two of these per axle.
You will also want to get some LMX Red Grease item # L11390 to repack your bearings. If you need a grease gun you will want to use item # L30200 and I strongly recommend using a bearing packer item # ALL647646 to not only make the job easier but it saves time hand packing the bearings.
The Bearing Kit item # BK1-150 you were looking at has the same inner and outer bearings, item # L44649, so it won't work for your R-Pod.
Product Page this Question was Asked From
Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649
- Race L44610
- 1000 lbs Axle
- 2000 lbs Axle
- 2200 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Video: Hands-On with the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
- Video: Review of the Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Search Results: paint
- Search Results: hub
- Shop: Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: l44649
- Q&A: How to Pick Out Replacement Hub for UFP Hub Marked H-1377 A4E
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Search Results: h~1377
- Q&A: Info Needed to Pick Out Replacement Bearings for Trailer
- Q&A: Replacement Bearing and Idler Hub Options For a 2006 Snowbear Utility Trailer With 2,000LB Axle
- Q&A: Replacement Slipper Spring For a Boat Trailer With 4-Leaf Spring 25.5" Long
- Q&A: Can I Replace Leaf Springs With Lower Rating For Better Ride Quality
- Video: Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly


