How to Confirm Fit of Roadmaster Spare Tire Carrier

Question

Question:

Will this work for 2019 Audi Q7?

asked by: Scott

0

Expert Reply:

The Roadmaster Spare Tire Carrier part # RM-195125 isn't year, make, and model specific. It's designed for any vehicle with a 2" trailer hitch receiver with a bumper clearance of at least 6-3/4". In regards to spare tire compatibly, it works on any wheels with an even bolt pattern with bolt circle from 4-1/2" to 7" or an odd bolt pattern with bolt circle from 4" to 6-1/8". I have attached for you below a few photos of the above to clarify further.

expert reply by: Conner L

0

How to Confirm Fit of Roadmaster Spare Tire Carrier
(click to enlarge)

Answer 1

The difference between the item #RM-195125 and the item #RM-195225 is that they are designed for different sized wheels. The item #RM-195125 is designed to handle up to 16.5" tall wheels where as the item #RM-195225 can hold between 16" and…

view full answer...

Answer 2

Since we don't have a way to attach a spare carrier to the rear of your slide-in camper your best option would be a hitch mounted spare carrier like part #6715 installed in the front hitch of your truck. If you can get me the year/make/model of…

view full answer...

Answer 3

I recommend the Roadmaster Spare Tire Carrier #RM-195125 for your 2023 Winnebago Travato 59KL. I have included a picture with this carrier on a Travato so you can see how it will fit past the bumper and ladder. If you are wanting to use the…

view full answer...

Answer 4

Hey Larry, we have the Roadmaster Hitch Spare Tire Mount #RM-195125 that can fold down for truck tailgate access. Is this what you were thinking of?

view full answer...

Answer 5

Since your 2020 Ram 3500 has an 8 lug bolt pattern and the wheel and tires would weigh less than 200 lbs the Roadmaster spare wheel carrier part #RM-195125 would work great for you.

view full answer...

Answer 6

The Curt Trailer Hitch Mounted Spare Tire Carrier part #c31006 does have quite the tilt to it and I would expect it to make contact as well. There is not a lot of room for this on the back of a camper. The Draw-Tite Front Mounted Trailer Hitch…

view full answer...

Answer 7

I checked with Roadmaster and they told me that from the center of the hitch pin to the other end of the hitch opening measures 14.88 inches.

view full answer...

Answer 8

You are correct that the inside of the wheel will be facing the back of your vehicle when installed on the Roadmaster Spare Tire Carrier #RM-195125. I'm attaching a dimensional photo of the plate to the operating handle of the carrier so you can…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

How to Confirm Fit of Roadmaster Spare Tire Carrier

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching