Color Functions For Solera SmartArm RV Awning Controller Wiring Harness

Updated 01/05/2023 | Published 01/01/2023

Question:

I was looking at the picture that shows the wire ends, but it didnt show the labels on those wires, so I was hoping you can send me a picture of the labels. In short, I was wondering if this wiring harness has the interior rocker switch wires prewired from the SmartArm connector.

asked by: David B

Expert Reply:

I reached out to Lippert on the Replacement Solera SmartArm RV Awning Controller Wiring Harness # LC56ED and the wiring coding is as followed:

#1 White = Light Ground
#2 Red - Power
#3 Black - Awning Motor
#4 Red - Extend 12V Input
#5 Red - Awning Motor
#6 Black - Ground
#7 Red - Light 12V Output
#8 Green - Wind Sensor Light
#9 Green - Light 12V Input
#10 Black - Retract 12V Input
(Numbers 11 and 12 may be unused)
#11 Red - OneControl Canbus
#12 White - OneControl Canbus

I will attach a picture below showing the wiring coding. If you have any further questions please feel free to reach back out to me anytime and I would be more than happy to further assist you.