Correct Wing Nut for Replacement Square Head Bolt - 6 mm x 61 mm

Question

Question:

Can you please tell me which wing nut will fit this bolt?

asked by: Ian S

0

Expert Reply:

The Replacement Square Head Bolt part # 853-2089 has M6x1.0 threads so any wingnut for this size will work. We don't have a bunch of universal wing nuts for these t-bolts but your local hardware store should have plenty.

expert reply by: Conner L

0

Answer 1

The Replacement Square Head Bolt #853-2089 that comes is the Thule Xadapt8 AeroBlade and Xsporter Load Bar Adapter #Xadapt8 is the longest M6 square head bolt we carry. This bolt is 61mm long and has threads that measure 1-1/4" long.

view full answer...

Answer 2

I have a couple of options for you for bolts that are compatible with the T-slots in the Wingbar Evo's but the Rhino Rack item #RR92XB do not fit. Instead you will want one of the following: Replacement Square Head Bolt - 6 mm x 61 mm item…

view full answer...

Answer 3

Yes, you can use the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 to attach your old Thule Sidekick cargo box to your 2018 Subaru Outback Wagon.

view full answer...

Answer 4

If you need replacement mounting hardware for your Thule Cascade Rooftop Cargo Box then we can help with this using the parts listed below. Unfortunately, we don't have any way to convert this mounting system over to a newer and easier to use…

view full answer...

Answer 5

The threaded section of the Thule Xadapt12 Watersports Adapter #THXADAPT12 measures 7/8" while the square head is 3/4" x 3/4" as you can see in the attached photo.

view full answer...

Answer 6

Thanks for the pictures! I have a set of flush mounted crossbars that will work with your Kia's raised rails, however the Yakima RailBar Crossbars item #Y00447-2 won't work. They don't fit Kia's rails. It looks like they are for older…

view full answer...

Answer 7

It sounds like you are looking at the Thule WingBar Evo Crossbars - Aluminum - Silver - 53" Long - Qty 2 #TH711400, and Evo Raised Rail Feet #TH710401. The crossbars are 3-1/8" wide x 1" tall which will absolutely fit the Skybox…

view full answer...

Answer 8

The threads inside Thule replacement knob #TH04877 are metal. I have included a picture where you can see a little bit of the inside part.

view full answer...

Answer 9

I went out into our warehouse and pulled a Replacement Plated U-Bolt Bracket #TH03918 to measure the dimensions. Check out the video I attached to see these measurements. 5 inches long 1 inch wide 4 inches between the outer holes measured on center 3…

view full answer...

Answer 10

I have a solution for you, but you're not going to be able to use the #TH27PQ to accomplish this. You'll need to find a cargo box that can be used on roof rack systems with a 42" crossbar spread and the only option we have for that is…

view full answer...

Answer 11

Based on your description of the the Thule ski rack fitting a square crossbar I'm going to assume you have the Thule FlatTop 724 or 725 ski carrier, and if so, there is an adapter that will allow you to mount it to the WingBar T-slot. What you…

view full answer...

Answer 12

I reached out to Thule and found that the difference between the Replacement 20 mm SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carrier #7521241002 and the 13 mm #7521241001 is the length of that center bolt/screw. You…

view full answer...

Correct Wing Nut for Replacement Square Head Bolt - 6 mm x 61 mm

Product Page this Question was Asked From

Continue Researching