Are the Threads Metal or Plastic in Replacement Wingnut for Thule Cargo Boxes

Question

Question:

Does the replacement knob #THO4877 have a metal or are the internal threads plastic/ vinyl?

asked by: Pat K

0

Expert Reply:

The threads inside Thule replacement knob # TH04877 are metal. I have included a picture where you can see a little bit of the inside part.

expert reply by: Michael H

0

click to enlarge

Answer 1

I have a solution for you, but you're not going to be able to use the #TH27PQ to accomplish this. You'll need to find a cargo box that can be used on roof rack systems with a 42" crossbar spread and the only option we have for that is…

view full answer...

Answer 2

I went out into our warehouse and pulled a Replacement Plated U-Bolt Bracket #TH03918 to measure the dimensions. Check out the video I attached to see these measurements. 5 inches long 1 inch wide 4 inches between the outer holes measured on center 3…

view full answer...

Answer 3

The Replacement Square Head Bolt #853-2089 that comes is the Thule Xadapt8 AeroBlade and Xsporter Load Bar Adapter #Xadapt8 is the longest M6 square head bolt we carry. This bolt is 61mm long and has threads that measure 1-1/4" long.

view full answer...

Answer 4

I have a couple of options for you for bolts that are compatible with the T-slots in the Wingbar Evo's but the Rhino Rack item #RR92XB do not fit. Instead you will want one of the following: Replacement Square Head Bolt - 6 mm x 61 mm item…

view full answer...

Answer 5

It sounds like you are looking at the Thule WingBar Evo Crossbars - Aluminum - Silver - 53" Long - Qty 2 #TH711400, and Evo Raised Rail Feet #TH710401. The crossbars are 3-1/8" wide x 1" tall which will absolutely fit the Skybox…

view full answer...

Answer 6

Thanks for the pictures! I have a set of flush mounted crossbars that will work with your Kia's raised rails, however the Yakima RailBar Crossbars item #Y00447-2 won't work. They don't fit Kia's rails. It looks like they are for older…

view full answer...

Answer 7

The Replacement Square Head Bolt part #853-2089 has M6x1.0 threads so any wingnut for this size will work. We don't have a bunch of universal wing nuts for these t-bolts but your local hardware store should have plenty.

view full answer...

Answer 8

The threaded section of the Thule Xadapt12 Watersports Adapter #THXADAPT12 measures 7/8" while the square head is 3/4" x 3/4" as you can see in the attached photo.

view full answer...

Answer 9

If you need replacement mounting hardware for your Thule Cascade Rooftop Cargo Box then we can help with this using the parts listed below. Unfortunately, we don't have any way to convert this mounting system over to a newer and easier to use…

view full answer...

Answer 10

Yes, you can use the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 to attach your old Thule Sidekick cargo box to your 2018 Subaru Outback Wagon.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Are the Threads Metal or Plastic in Replacement Wingnut for Thule Cargo Boxes

Product Page this Question was Asked From

Continue Researching