Parts Needed to Install Crossbars on the Yakima 72" HD Tracks for Roof Racks

Question

Question:

I want to put these on my truck topper. What parts do I need to install crossbars on them?

asked by: Kristy

0

Expert Reply:

To install crossbars on the Yakima 72" HD Tracks for Roof Racks # Y84MR you need 2 of the Landing Pad 26 # Y75ZR, the SkyLine Towers # Y53TR, and then your choice of Yakima crossbars.

I recommend using the JetStream crossbars like the 50" # Y00425 because they look great, they are durable, and they are made of aluminum so they will last a long time.

I like this system because you can adjust the crossbars along the rails to accommodate different accessories you might need on your truck.

expert reply by: Jon G

0

Answer 1

Hi David, I checked the 5 styles of tracks we carry and it looks like the Rhino Rack options will be the most narrow at 1-1/2". In case you were curious about the other style (and brands), I have all my findings listed below. 1-1/2" wide -…

view full answer...

Answer 2

The 66 inch length of the Rhino-Rack RT-Style Roof Rack Tracks #RRRTV168 includes the end caps. Now with that said you could trim down the track as needed. The Yakima Landing Pad 1 part #Y00221 does fit this as well.

view full answer...

Answer 3

The Yakima JetStream crossbars have a T-slot that is 1 inch wide and 1/2 inch tall so any t-bolt used would have to fit within those measurements. The 4-bolt set of M10 x 1.5 x 25 bolts #Y8880184 will work since the head is 3/4 inches square but I…

view full answer...

Answer 4

The T-bolts in the Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers #Y8880184 are going to measure 3/8" x 1" long. The next size up would be 3" long, but if you can let me know the product you're trying to…

view full answer...

Answer 5

Rhino-Rack tracks #RRRTV168 are 66-1/8" long x 1-1/2" wide x 1/2" tall. Yes, they are compatible with the RLT600 legs #RRRLT600. They are also compatible with Rhino-Rack RLTP, RLTF, and RLT500 legs.

view full answer...

Answer 6

The part #853-0782 sounds like what you are looking for. This is a similar T-bolt but the threaded section is 1-7/8 inches.

view full answer...

Answer 7

A 6.7 foot bed is about 80 inches long. If you wanted to get the longest tracks you can get for your Leer Topper I would suggest getting these #RTC18 which are 71 inches long. I like enabling my vehicle as much as possible. With the long tracks you…

view full answer...

Answer 8

Yes, the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long - Qty 2, part #RTC18, will work with Yakima's Landing Pad 1. The rack will consist of the following; SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush…

view full answer...

Answer 9

Each of the Megawing carriers part #MPG207 weighs 15 lbs so if you had two of them plus the weight of two 68 lb kayaks you'd be looking at a total weight of 166 lbs which would be more weight than what the upper bars can handle. If you could put…

view full answer...

Answer 10

The Replacement Top Channel Crossbar Infill for Yakima HD Style Crossbars #Y33KV is the Yakima 8881036 and the correct insert for your Yakima HD Crossbars #Y01158. The Replacement Top Infill #Y01166 is the Yakima part number 8001166 which fits both…

view full answer...

Answer 11

Hi Ken, The slots are slightly different between the standard Yakima Tracks (42" #Y01126, 54" #Y01127, 60" #Y01135) and HD Tracks (54" #Y64MR, 60" #Y74MR, 72" #Y84MR) so the Rhino-Rack Roof Rack for Thule and Yakima…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...