Retaining Nut For Dexter Hub & Drum 5,200 lb - 6,000 lb Part 8-201-9UC3-EZ
Published 11/22/2022
Products Featured in This Question
Question:
What is the size and thread count of the retaining nut so I can get the right die to chase the spindle threads . Thank you
asked by: Randy F
0
Expert Reply:
The retaining nut for the Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 # 8-201-9UC3-EZ is a 1"-14 size nut.
The nut is the Replacement Trailer Spindle Jam Nut # 6-191.
expert reply by:
Kyle S
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Dometic Soft Start for Dometic B59516.711C0-MX
- Q&A: How to Add Timbren Axleless Suspenion to a Trailer and Use 5 x 5 Lug Jeep Wheels
- Q&A: Victron Smart Dongle vs Cerbo GX Explained for MultiPlus-II Remote Control
- Q&A: Will TruRyde Trailer Hub and Drum Assembly Fit 2019 Travel Trailer With 3,500 lb Axle
- Q&A: Can A Hub With A 15123 Bearing Be used To Replace A Hub That Used An LM67048 Bearing?
- Q&A: Replacement Brake Assemblies and Hub/Drum for Airstream with Nev-R-Lube Hub/Drums
- Q&A: Replacement Brakes, Hubs, Bearings and Seals for 2022 Conqueror UEV490
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)