Replacement MORryde CRE3000 Rubber Equalizers on a Montana Mountaineer 5th Wheel
Published 11/17/2022 >
Products Featured in This Question
Question:
Which equalizer will work on my 2010 Montana Mountaineer? It has 6K Dexter axles on a 35 inch spread. Current equalizer is a Equa-flex trailaire. Overall height is 7 inches. Between the spring mount holes is 6 7/8 inches. Height from spring hole to top mount hole is 3 1/2 inches. Diagonal measure from spring hole to top hole is 4 1/2 inches. Shackles are 3 1/8 inches. I would also like greaseable bolts and bronze bushings. Your recommendation would be appreciated.
asked by: Tommy G
Helpful Expert Reply:
To replace the Equa-Flex Equalizers on your 2010 Montana Mountaineer you are going to want the MORryde Rubber Equalizers for Tandem Axle Trailers item # MR87ZR. These have nearly identical dimensions and will work great as both a replacement and an upgrade.
The MORryde is 6-1/2" on center from the front shackle bolt to the center of the rear shackle bolt. The height is 3-1/8" from the equalizer mounting bolt to the center line of the shackle bolts. I have linked a diagram with the dimensions below.
For a replacement shackle strap kit with wet bolts and bronze bushings you will want the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps item # MR76ZR.
I have linked a couple of installation videos below that will help you get these parts installed on your 5th wheel trailer.
Product Page this Question was Asked From
MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 8 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Search Results: morryde trailer suspension parts
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers w/ LRE Suspension and Correct Track
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w/ LRE Suspension & Correct Track
- Shop: MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Q&A: Replacement Bronze Bushings for MoRryde CRE3000 Suspension System
- Search Results: morryde cre3000
- Search Results: morryde cre3000
- Video: Installing the Dexter U-Bolt Kit on a 2018 Grand Design Reflection Fifth Wheel
- Video: Review of MORryde Trailer Leaf Spring Suspension - Triple Axle Rubber Equalizers - MR59ZR
- Shop: Performance Chip Tuners
- Q&A: Replacement Suspension Components for 2014 Redwood 5th Wheel
- Q&A: Correct MORryde Suspension Upgrade Kit for 2013 Keystone Monatana Mountaineer With LRE4000
- Search Results: cts3
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation - 2009 Keystone Montana Mountaineer
- Video: Review of MORryde Trailer Leaf Spring Suspension - Replacement Rubber Shear Spring - MR79UR
- Shop: Air Filter
- Shop: Tool Box
- Q&A: Will The MORryde Wet Bolt Kit Fit a 2014 Grand Design Solitude 5TH Wheel?
- Search Results: lippert hydraulic jack
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Search Results: replacement
- Search Results: morryde
- Q&A: Which is Best MORryde Rubber Equalizer For Up 8,000 lb Axles
- Shop: Vehicle Seat Covers




