Replacement Nylon Bushings And Wet Bolts For Leaf Springs On A 2000 Pequea 1018 Deckover Trailer
Published 11/01/2022
Products Featured in This Question
Question:
I have a 2000 Pequea 1018 deckover trailer that I need spring bushings and bolts for do you carry them? Or do you sell the axle springs as replacements, I prefer to just replace the bushings and bolts?
asked by: Lee W
Expert Reply:
When it comes to replacing your spring bushings you will first need to remove one from your current double eye leaf spring on your 2000 Pequea 1018 Deckover Trailer and use a Digital Caliper # PTW80157 to find out what the inner and outer diameter of your bushing is.
The Nylon Bushing # TRBU11566 has a 9/16 inch inner diameter and has a 11/16 inch outer diameter. The Shackle Bolt # 166081 is needed to install the bushing.
The Nylon Bushing # TRBU11506 has a 1/2 inch inner diameter and has a 11/16 inch outer diameter. The Shackle Bolt # ABS74FR is needed to install the bushing.
Both bushings and bolts are sold with a qty 1 so you will have to purchase the correct amount needed to get your trailer back to tip top shape. If your bushings measure to be different please reach back out to me and I can find you the correct one.
I attached a review video link below.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 6000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/8 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer leaf springs
- Search Results: galvanized hubs
- Q&A: Looking for Wet Bolts and Bushings for Road Armor Equalizers
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Q&A: What Wet Bolts Fit Road Amor Equalizers?
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 3-3/8" - Qty 1
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 2-15/16" - Qty 1
- Shop: 4-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/8" Long
- Search Results: brake lines
- Search Results: hydraulic brake lines
- Search Results: hydraulic drum brakes trailer brakes
- Search Results: boat trailer springs
- Search Results: shackle plate
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - Dacromet - 10" - Left/Right - 3.5K
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet
- Video: Installation Guide for the Lippert AP Kit on a 2022 Grand Design Imagine Travel Trailer
- Video: Replacement Shoulder Bolt for Lippert Tandem Axle Lift Kit: The Breakdown
- Video: Breaking Down the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
- Video: A Closer Look at the Lippert AP Kit
- Video: Ultimate Overview of the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
- Video: Ultimate Overview of the Lippert AP Kit
- Q&A: Replacement Wet Bolts For Lippert Shackle Kit On Road Armor Suspension.
- Q&A: Wet Bolt Kit For Road Armor Equalizers on Tandem Axle Trailer
- Q&A: Recommended 3-1/8 Inch Shackle Strap and Wet Bolt Kit for a Road Armor Equalizer
- Q&A: Hardware Kit for Use with Lippert Road Armor Equalizers
- Q&A: Will MORryde Suspension Kit Work With Road Armor Shock Absorbing Equalizers
- Video: Demco Hydraulic Brake Line Kit Review