Best Weight Distribution Size for 1,200 lb Loaded Trailer Tongue Weight
Updated 10/31/2022 | Published 10/29/2022 >
Products Featured in This Question
Question:
I have a e4 12000, 1200 trundle hitch, hitch weight 726 empty, actual weight 1100, 8000 gvrw, actual 7700 loaded, with full water just over 1200 tongue weight, is this sized right, if not can the bats only be changed to heavier size?
asked by: Rex S
Expert Reply:
Thanks for reaching out!
Ideally your total tongue weight (loaded trailer tongue plus weight of cargo behind the rear axle of your tow vehicle) will fall in the middle of your weight distribution tongue weight range. Your 12K e4, which is essentially the Equal-i-zer Weight Distribution System # EQ37120ET, has a tongue weight range of 800 lbs - 1,200 lbs. Since the loaded tongue weight of just your trailer already exceeds this, the system isn't really doing much for you and you need to upgrade.
You can upgrade different parts of your system but you would need an entirely new head AND arms. If you want to stick with the e4 system and your shank is rated high enough then you can simply get the 14K Equal-i-zer Weight Distribution w/ 4-Point Sway Control # EQ37141ET which has a higher tongue weight range of 1,000 lbs - 1,400 lbs.
Please note that the loaded tongue weight of your trailer needs to be 10%-15% of the weight of your loaded trailer. With your loaded trailer weighing in at 7,700 lbs the tongue weight of your trailer alone should not be exceeding 1,155 lbs. Too much tongue weight or too little tongue weight can negatively impact your towing performance so I recommend moving some stuff around in your trailer if you plan on towing with full water (which is only recommended if you're overlanding...if you're going to a park with a water hookup it's much safer to travel with empty water tanks).
Attached are some videos and helpful articles on weight distribution for you to check out.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Is Weight Distribution Needed for 2019 Chevy Silverado 1500 Towing 2019 Keystone Hideout 22RBWE
- Q&A: Adjustable Ball Mount with Sway Control
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Will Air Lift LoadLifter 5000 Fit 2026 Toyota Sequoia TRD Pro
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Is The Gen-Y Hitch Nomad Pin Box GY57ND The Same Dimensions As Lippert 1621 Pin Box?
- Q&A: Weigh Safe True Tow Weight Distribution System For 7,600 Pound Trailer
- Q&A: Weight Distribution Hitch for 2026 Chevy Silverado 3500 Towing Brinkley Z Air 297
- Q&A: Best Weight Distribution Hitch For 7,500 lb Travel Trailer Pulled By 2022 Ford F350
- Article: How to Measure for Trailer Hitch Drop
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices





