Solution for Black Snap-In Plug for Lionshead Trailer Wheel Center Caps

Question

Question:

I have a 2022 Forest River Ibex 19QBS. I am looking for the snap in plug for a Lionshead Trailor wheel center cap in black. You have it in chrome LHSI60C. Thank you for your help.

asked by: Rich O

0

Expert Reply:

The Snap-In Plug # LHSI60C is the only available plug for a Lionshead wheel center caps like the # LHCS109. Unfortunately, that means they only come in chrome. However, if you really want black it could easily be painted. Make sure if you choose to paint it that you don't cover the notch that allows you to remove the plug from the wheel center cap.

expert reply by: Robin H

0

Answer 1

According to Lippert they use Lithium Complex grease on their 2k-7k axles. This means you can use a Lithium Complex grease like the LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge #L11390 for your bearings.

view full answer...

Answer 2

For a Lippert 4,400 lb trailer axle the correct bearing kit is the part #BK2-100 which includes inner bearing #L68149, inner race #L68111, outer bearing #L44649, outer race #L44610, grease seal #58846, a cotter pin and a tang washer.

view full answer...

Answer 3

Snap-In Plug for Lionshead Trailer Wheel Center Caps #LHSI60C measures 2.17 inches in overall diameter and from the outside of one tab to the outside of the opposite tab is 1.92 inches. I have included a picture showing this. This cap was designed…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 6

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 7

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 8

I sure can Blake! I just heard back from Dexter and both of your axles are 3,500 lbs capacity. That's all the information they were able to provide. Here are the replacement parts you've requested: Hub/Drums - 5 on 4-1/2 Lug Nut Pattern item…

view full answer...

Solution for Black Snap-In Plug for Lionshead Trailer Wheel Center Caps

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching