Replacement Hub For Dexter Idler Hub Using L44643 Bearings and a 1.250" Inner Diameter Grease Seal
Published 10/05/2022
Question:
I have a dexter hub off a Harley rake. The bearing is L44643, and the seal numbers are 1.250, 1.983, 0.250 12428 A34934 its open on both ends. Do you have is the hub with bearings and seals? Thanks
asked by: Chris H
0
Expert Reply:
The CE Smith Trailer Hub Assembly # CE13110 is the closest we have filled with bearings and the correct grease seal for your current hub. It is a 4 on 4" bolt pattern and also includes new lug nuts and a grease cap.
expert reply by:
Bud M
0
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Continue Researching
- Q&A: Does Ducted Furrion Chill Cube With Heat Pump Include Remote
- Q&A: Replacement 4 on 4 Bolt Pattern Hub Compatible With 1.063 Inch Straight Spindle
- Q&A: Replacement Dexter Hub for 8-91A Hub
- Q&A: Recommended Leaf Springs, U-Bolts, and Suspension Bolts for a 2,000 lbs 1-3/4" Diameter Axle
- Article: Trailer Tire Sizing
- Q&A: Double Lip Grease Seals to Replace Transcom Seal 12192TB
- Q&A: Replacement Hub For A 1949 Or 1950 TeeNee Boat Trailer With Short Spindles
- Article: Most Popular Wheel Bearings
- Q&A: Correct Hub for Dexter EZ Lube 3,500-lb Axle
- Article: Trailer Lighting Requirements
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Best Boat Trailer Jacks