Replacement Bearing Kit For a Pop-Up Camper That Uses L44649 Bearings
Published 09/15/2022
Products Featured in This Question
Question:
Hi I have an old camper i want to change the bearing, seals, dust caps and washers if they are part of it. It looks like I have the e-trailer BS axel with L-44649 bearings what kit fit that Thanks
asked by: Gary M
Expert Reply:
The etrailer Axle # e32GR uses a Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-2-EZ-2K which will use the Bearing Kit # BK1-150. I do recommend pulling one of your hubs apart to verify that the bearings and seals match the spindle on your axle. For this bearing kit to fit you will need a BTR Spindle # TRU44FR on your axle that has a 1.5" landing for the grease seal and a 1.063" straight spindle for the inner and outer bearing. If you have any other measurements please let me know so I can confirm the correct kit.
(click to enlarge)
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Q&A: How to Install Yates Keel Pad on Crossmember
- Video: Feature Review Adjustable-Height, Folding Platform Step
- Q&A: Recommended Replacement For A DICO 45263 Idler Hub
- Q&A: How to Determine Correct Hub For Karavan PWC Trailer
- Q&A: Availability Of Replacement Hub For Dico 45263
- Video: All About the Grease Seal
- Video: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles Spec Review
- Video: Detailed Breakdown of the Double Lip Grease Seal
- Search Results: ce13311
- Search Results: idler hub assembly
- Q&A: Bolt Pattern Referred To In Hub and Wheel Fit
- Video: Trailer Idler Hub Assembly for 3,500-lb Axles Review
- Video: Feature Breakdown: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12" - 5 on 4.5 - Pre-Greased
- Video: RodBunk Fishing Rod Carrying System for Truck, SUV or Van Review
- Q&A: Replacement Axle And Leaf Springs For A 4' x 6' Single Axle Trailer
- Article: Slipper Spring Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Search Results: spring seats
- Search Results: b&w
- Search Results: winch cable
- Search Results: bow rollers
- Q&A: Replacement Slipper Style Leaf Spring for 1984 Tee Nee Trailer
- Article: Trailer Wiring Diagrams