Dimensions of Malone Kayak Storage Rack for 3 Kayaks MPG318

Question

Question:

I am looking for a kayak storage rack and like the Malone Kayak Storage Rack for 3 Kayaks, but want more information about the dimensions. I see that the total depth of the rack is 37 inches, however: Do you know the distance of the horizontal arms at the back that are at ground level? Or put another, how far off the wall would the vertical poles be? Then how far off the wall would the shorter kayak arms be? The description said they were about 20 inches, but I am trying to find the distance from the wall to the end of the kayak rack arm. It looks like it is shorter than the ones at ground level. Thanks,

asked by: Ryan B

1

Helpful Expert Reply:

I checked with Malone and they were able to send me a dimensional picture of the Malone Kayak Storage Rack for 3 Kayaks # MPG318 that I attached for you to check out. If I am understanding your question correctly the upper arms would be a total of 39 inches from the wall if it was set right up against a wall and the lower arms would be 32 inches.

expert reply by: Jameson C

1

Dimensions of Malone Kayak Rack
(click to enlarge)

Dimensions of Malone Rack
(click to enlarge)

Answer 1

Hey Paul, the Malone Kayak Rack part #MAL57UR that you referenced would be exactly what you are looking for. This can hold two kayaks up on end like you are in need of. See attached picture.

view full answer...

Answer 2

The SumoSprings Solo Custom Helper Springs item #SSR-307-47 have a 1500 lbs capacity whereas the SumoSprings Solo Custom Helper Springs item #SSR-307-40 have a 1,000 lbs capacity for lighter towing and hauling applications. Both are designed to offer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Hey Joseph, thanks for reaching out. The difference between the yellow and black SumoSprings is the weight capacity or stiffness of the spring. For the 2018 Ram ProMaster 1500, the black ones part #SSR-307-47 are 1,500 lb capacity. Those are good for…

view full answer...

Answer 8

Hey Brandon, thanks for reaching out! The brake controller plug for your 2025 Ram 1500 is under the dash to the right of your steering column, according to the installation instructions for the Curt TriFlex NEXT Trailer Brake Controller w/ Custom…

view full answer...

Answer 9

Hey Vincent welcome back! I totally get the not wanting to call in. I can't hear out of one ear so I get it. The Roadmaster Sterling Tow Bar Adapter Brackets for Demco Base Plates item #DM9523062 are indeed the correct adapters. The item…

view full answer...

Answer 10

Welcome back, Randy! The Demco Tabless Base Plate Kit - Removable Arms #DM9519341 will be the easiest to install out of all the base plates we currently have for your 2025 Ram 1500. It does require the least amount of modifications as well, so it…

view full answer...

Answer 11

Hi Gil! Good catch. The Firestone Coil-Rite Air Helper Springs - Rear Axle #F4130 does indeed have 2,000 pounds of capacity, just like the Firestone Coil-Rite Air Bags w/ Easy Mount Compressor and In-Cab Control - Single Path - 2,000 lbs #F66XV. I am…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Dimensions of Malone Kayak Storage Rack for 3 Kayaks MPG318

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching