Solution for Replacement Hubs on Boat Trailer With L44649/LM11749 Bearings
Updated 08/09/2022 | Published 08/06/2022
Products Featured in This Question
Question:
Hello. I have an old, small boat trailer. The wheel hub is four lug and stamped ODD-1106 there may be another letter before ODD. Bearings are Timken L44649 and Timken LM11749. The seal is Timken 7994s. The hub dust cap diameter appears to be just barely over 1.5. Any chance you have a replacement hub, or can suggest an alternate? Thanks so much!
asked by: Stephen
Expert Reply:
I have a solution for you, but we do not have any hubs that use inner bearing # L44649 and outer bearing LM11749. This is an old bearing combination no longer used so replacement hubs aren't around anymore. It is for that reason that the best option is to replace your axle with one that uses a standard bearing combination.
Based on the bearings, what you have is likely a 2,000 lb axle. I recommend checking the axle tag to verify this information. In addition to the capacity, you will also need the length of the axle. This is the hub face to hub face measurement. You can also get the spring center to spring center measurement, although the spring seats can be moved if needed.
For example the Trailer Axle with Idler Hubs # e25GR has a hub face to hub face measurement of 60" and a spring center to spring center measurement of 48". This axle uses the # L44649 inner and outer bearings and includes hubs with a 4 on 4 bolt pattern.
If you find your measurements are the same you could use this as a replacement. If you find that they are different let me know and I will see what is available.
(click to enlarge)
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Shop: Yates Endcap for Boat Trailer Rollers - Plastic - 5/8" Shaft - Qty 1
- Search Results: coupler
- Shop: Demco Trailer Coupler - Flat Plate Mount - eZ-Latch - Black - 2-5/16" Ball - 21,000 lbs
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Search Results: 12" wheel
- Shop: Trailer Hitch
- Q&A: Repair Kit for Ram Series 12000 Trailer Jack
- Search Results: c5g1216
- Search Results: tools
- Search Results: light bracket
- Search Results: maxx air vent
- Search Results: light boxes
- Shop: Mounting Bracket for Optronics A91, AL82, AL90, AL91, and AL191 Series Lights - Open Back - Chrome
- Shop: Black Bracket and Single Plug-N-Go Plug for Thin Line Trailer Clearance and Side Marker Lights
- Shop: Optronics Trailer Clearance and Side Marker Light - Submersible - Rectangle - Amber Lens
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: How to Choose a Trailer Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Shop: Brake Controller
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
on Trailer Axles
