Replacement Grease Seal for 4,400 Pound Dexter Axle

Question

Question:

Looking for grease seals for a 2017 Sunset Trail 331BH. Dexter axle 635096 4400 lbs

asked by: Martin L

0

Expert Reply:

Your 635096 Dexter Axle uses grease seal # 58846. If you end up needing replacement bearings as well, the correct bearings are the # L68149 and # LM67048.

expert reply by: Robin H

0

Answer 1

Hello again, Ray. Good to hear from you. Your Dexter 635096 4,400 lb axle uses the Trailer Hub and Drum Assembly #8-407-5UC3-EZ. This uses the #L68149 (1.378" inner diameter) inner bearing and #LM67048 (1.25" inner diameter) outer bearing.…

view full answer...

Answer 2

Your Dexter D44 Axle number 635096 uses the Trailer Hub and Drum Assembly #8-407-5UC3-EZ that comes preloaded with the Races #LM67010 and #L68111. It does include the Bearings #L68149 and #LM67048, Grease Seal #58846, Grease Cap #21-42-1 and lug…

view full answer...

Answer 3

The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 will not include wet bolts. This is due to the system using slipper springs to replace the double eye springs that come on most trailers. With the slipper springs…

view full answer...

Answer 4

Hey Joseph, the CE Smith trailer hubs we offer that are pre-greased like the part #CE13515 come with the LMX Red grease like the #L11390.

view full answer...

Answer 5

I recommend using the LubriMatic LMX Industrial Strength Grease #L11390 on the Wet Bolts #LC52SV for the Road Armor Shock Absorbing Equalizer Kit #LC696740. This grease is formulated for superior performance in cold and hot climates. It is also…

view full answer...

Answer 6

Hey Viencent, thanks for the information! To replace the bushings in your slipper springs, I recommend the Dexter Bronze Bushings item #K71-291-00. These have a 11/16" outer diameter and will replace all four of the bushings on your car hauler.…

view full answer...

Answer 7

Hi Phil! The main difference between the etrailer Easy Grease Trailer Hub and Drum Assembly #AKHD-865-7-2-EZ-K and the Dexter Trailer Hub and Drum Assembly #42866UC3-EZ is where they are made. Ours are made over seas and Dexter hubs are made here in…

view full answer...

Answer 8

Hey John! The wet bolts on your Lippert Road Armor #LC53CK really only need a couple pumps of grease every 6 months. Lippert recommends applying grease until you see fresh grease begin to squeeze out around the bolt and bushing area. Once you see…

view full answer...

Answer 9

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hi Donny; after looking at several videos of the trailer it does appear to have a 6 on 5-1/2 bolt pattern with ST225/75R15 tires. The Goodyear Endurance ST225/75R15 Radial Tire w/ 15" Eagle Aluminum Wheel #GY97QB will be a direct fit.

view full answer...

Replacement Grease Seal for 4,400 Pound Dexter Axle

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching