Replacement Rear Tire Strap For Kuat Transfer V1 Bike Racks

Question

Question:

Im looking for a replacement rear tire strap for a Kuat Transfer V1. Do you carry this part?

asked by: Matt K

0

Expert Reply:

The Phat Bike Adapter Kit # APBK will include a strap that will fit your Kuat Transfer V1. We do not carry a standard replacement strap for the rack as it is discontinued from Kuat. The larger strap will allow you to fit tires up to 4-1/2" wide with your rack.

expert reply by: Bud M

0

Answer 1

It sounds like you're looking for a hitch for your 2011 Toyota RAV4. I recommend the Curt Class III, part #C13149. It's a 2" hitch that has a max tongue weight of 525 pounds and max towing capacity of 3500 pounds. It can handle the Thule…

view full answer...

Answer 2

You'll just need to unlock the knob on the Thule T2 Pro XT #TH83JV and then continue tightening it down until it is snug, wobbling it along the way to make sure that it is secure in the hitch receiver. If you fast forward through the attached…

view full answer...

Answer 3

When you say "Bike started to come off the back of the trailer" does that mean that you are using the T2 Pro XTR #TH69TX on the back of a trailer? If so then that could be the problem. The issue is that there is significantly more movement…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Answer 6

Hi Denny; assuming you have a 2023-2026 Mazda CX-50 Hybrid you can use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C45FV. This plugs into the connection points in your rear cargo area and will provide you with a…

view full answer...

Answer 7

Hey Mike, so I checked with Curt and their hitch part number 13630 which is our part number #C33MJ does fit the 2025 Mazda CX-50 hybrid. Curt says this actually fits all models of the vehicle actually. What are you planning on using the hitch for?

view full answer...

Answer 8

If you want use your Kuat Sherpa 2.0 #SH22B with fat tire bikes, you can use the Phat Bike Adapter Kit #APBK! This is an extra long strap to replace the current straps on your Sherpa or any other Kuat platform style rack. I attached the install video…

view full answer...

Answer 9

Hey George. The Curt Hitch item #C77MJ weighs 31.4 lbs. This hitch is custom fit for all models of the 2019 Toyota RAV4. It is a class III hitch with a 2" receiver that has a 4,500 lbs towing capacity and a 675 lbs maximum tongue weight. What…

view full answer...

Answer 10

I have a solution for you. Here at etrailer, we highly discourage the use of wheel-mount style bike racks when transporting bikes with fenders. With that being said, even if the front wheel of your Macwheel did safely attach to the Kuat Transfer V2…

view full answer...

Answer 11

While the Kuat NV 2.0 #NV22B can accommodate 4-1/2" wide tires, you need the phat tire adapter straps #APBK to do so.

view full answer...

Answer 12

With that middle exhaust pipe on the 2023 GR Corolla a trailer hitch won't be an option. The only solution will be to use a trunk mount bike rack like the Yakima FullBack 2 Bike Rack #Y02634 if you want to carry bikes with the GR Corolla. This…

view full answer...

Replacement Rear Tire Strap For Kuat Transfer V1 Bike Racks

Product Page this Question was Asked From

Continue Researching