Can Class I Trailer Hitch Receiver Be Converted to Class II on 2017 Hyundai Elantra GT

Updated 07/05/2022 | Published 07/03/2022

Products Featured in This Question

Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs

(9)

$2021.99

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(23)

$59.96

2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs

(2621)

$18.47

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(25)

$178.07

Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs

(2328)

$31.99

Question:

I have been researching motorcycle hitches and receivers and I find that my Hyundai Elantra GT can only fit a Class I receiver but most or all hitches are Class II. Im looking into anything fancy like a trailer but a small hitch that holds the front wheel. Is there anyway to adapt the receiver to fit a Class II? Thanks!

asked by: Abigail M

Expert Reply:

You are correct, the only hitches available that fit your 2017 Hyundai Elantra are Class I like the Draw-Tite Sportframe # 24905. Unfortunately, there is no way to convert this into a Class II hitch with a higher capacity. Also, both would still have a 1-1/4" receiver. If you meant is there a way to adapt the receiver into a 2" receiver then that will also not be possible. Even if you could use an adapter it would reduce the capacity of the hitch by 50%.

The only way you will be able to tow your motorcycle with your Elantra will be with a trailer like the # K2MMT5X7 you looked at. You will also need a ball mount like the # 3594 and the # 19258 for a 2" ball. For wiring to power the trailer's signal lights you can use the # 118692.

expert reply by: Robin H