Wiring Needed To Rewire A Sled Bed Enclosed Snowmobile Trailer

Updated 06/17/2022 | Published 06/16/2022

Products Featured in This Question

10 Gauge Wire - Blue Primary - Per Foot

(108)

$1.65

16 Gauge, 4 Conductor Bonded Parallel Wire - Per Foot

(237)

$2.47

Question:

I have a sled bed enclosed Snowmobile trailer. Wiring runs through the frame. What wiring kit do I need to redo all the wiring? Thanks

asked by: Terry W

Expert Reply:

For your sled bed enclosed snowmobile trailer, the first place to start when rewiring is with a junction box, like the Epicord 7-Way Molded Trailer Plug with Junction Box # 277-000141.

To install this, you will need to pick a location on your trailer frame that allows the 10' 7-way lead to reach the front of the trailer.

For the remainder of the wiring you can use # 10-1-1 which you'd run for your ground, 12v accessory, and brake output.

For the the lighting, you can use the Bonded 4 Wire # 16-4B-1 in which you can separate the wires and run them to each light assemblies.

Additionally, # 10-1-1 and # 16-4B-1is sold by the foot, so keep that in mind.