Can the Aluminum Nosing Edge Trim Be Bent

Question

Question:

Can it be bent around a curve for door on this horse trailer ?

asked by: Elliot

0

Expert Reply:

The Nosing Edge Trim # 362555-955 is made of aluminum and can be bent fairly easily.

expert reply by: Scott S

0

enclosed trailer
(click to enlarge)

enclosed trailer alternate side
(click to enlarge)

Answer 1

In regards to the Nosing Edge Trim part #362555-955, the overall depth at the deepest point is 3/16" thick. I have attached a photo below to help clarify.

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 4

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 5

Hey Chris! For your 2018 Honda Ridgeline, I recommend the Fas-Top Sport Soft Roll-Up Tonneau Cover #FT79SV if you want a roll-up. This is the only model that mounts on top of the bed rails, so you can still open your in-bed trunk all the way. If you…

view full answer...

Answer 6

The connector for the Tekonsha Plug-In Wiring Adapter #3070-P is located above the parking brake on your 2023 Honda Ridgeline. Even knowing where it is still proves difficult to get to the connector and attach the wiring adapter. I know several…

view full answer...

Answer 7

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

view full answer...

Answer 8

Hey Jeff, thanks for reaching out. I just went out to our warehouse and measured the P&F Products J-Channel Rail for Enclosed Trailers #PF26FR. The interior dimension of the J-channel I measured at 0.17". What thickness plexiglass were you…

view full answer...

Answer 9

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

view full answer...

Answer 10

Hey Steve! The closest piece of trim we have to what you described is the Nosing Edge Trim for Enclosed Trailer item #362556-955. It measures 93-1/2" long x 1-1/4" tall and has a 3/16" lip on it. I do not have a database that will show…

view full answer...

Answer 11

Wiring connections for the Electric Over Hydraulic Brake Actuator are as follows. Yellow - Cold side of breakaway switch, The wire that goes hot when a breakaway occurs. Black - Positive connection on breakaway switch, The wire that charges the…

view full answer...

Answer 12

Hello Robert, thanks for reaching out. A SumoSpring kit like the SumoSprings Solo Custom Helper Springs #SSR-130-54 will definitely help absorb shock and reduce any jarring and chucking. The #SSR-130-54 you were looking at are a fit for the 2021 Ford…

view full answer...

Can the Aluminum Nosing Edge Trim Be Bent

Product Page this Question was Asked From

Continue Researching