What Are The Dimensions Of Brophy BR56VR

Question

Question:

Dimensions on the Brophy BR56VR are scarce!

asked by: Ron R

0

Expert Reply:

The Brophy Rigid Mount Spare Tire Carrier for 4 inch or 4-1/2 inch RV or Mini-Motorhome Bumpers # BR56VR per Bropy states that from the top lug bolt down to the top of the U-bolt is 6-1/2 inches.

expert reply by: Noah E

0

Answer 1

I forwarded all of this to my contact at Lippert and he was able to determine that you have the single diamond style torsion axle so the correct lift kit you need is the part #LC270682.

view full answer...

Answer 2

The Brophy Rigid Mount Spare Tire Carrier #BR56VR will allow you to carry a spare tire with Wheel #TA56FR on your 4" RV Bumper. I have included an image below of a similar setup so you can see how it fits.

view full answer...

Answer 3

Based on the information I was able to find on your 2021 Coleman lantern 17B Travel Trailer it looks like it has either a 4" or 4-1/2" square rear bumper. I recommend measuring your rear bumper to confirm this, and if you do in fact have a…

view full answer...

Answer 4

We do have a lift kit for your Lippert 7K torsion axle but the Dexter Torflex Lift Kits like part #K71-725-02 are designed to fit specific Dexter torsion axles. For example, the above mentioned kit will only fit a #12 Torflex axle that has a 5,500 -…

view full answer...

Answer 5

Skid wheels, including the Ultra-Fab Skid Wheels for Class C RVs up to 34' Long #UF48-979012 are not designed as fully weight-bearing entities so they do not have an official weight capacity. They are only meant as a stopgap for occasional use to…

view full answer...

Answer 6

Hey Phillip, a weight capacity for the Ultra-Fab Skid Wheels for Class C RV #UF48-979012 that you referenced is not available. Since these are designed for use with motorhomes the are rated by length of motorhome. This one is good on RVs that are up…

view full answer...

Answer 7

I believe the issue regarding why a 2017 Winnebago Micro Minnie can't have its axle flipped is because it has torsion axles, which do require what are essentially spacers but are called a lift kit. The correct lift kit is going to depend on your…

view full answer...

Answer 8

The Axle Riser Kit - Single Square Torsion Axle part #LC382741 will lift both sides of the trailer frame up 3-1/2" to add clearance between the frame and the axle. To install the axle riser kit you want to raise the trailer one side at a time by…

view full answer...

Answer 9

I attached a link to this page that has the install instructions for the Axle Riser Kit #LC382741 that you referenced.

view full answer...

Answer 10

Thanks so much for the photos, and based on those, your 2018 Liberty Outdoors Little Guy Max travel trailer has a 3,500 lb Lippert square torsion axle, for which we do have the correct lift kit, which is the following: - Axle Riser Kit - Single…

view full answer...

Answer 11

Thank you for the pictures! When I reached out to my contact at Lippert he was able to confirm that the Axle Riser Kit #LC270682 is compatible with the axle on your 2017 Scamp trailer (according to the info on the tag). The description says…

view full answer...

Answer 12

The Triple LED Trailer Tail Light part #CE44VR is a pretty common OEM taillight used on motorhomes so as long as the style is the same as the one you have and the dimensions of 14" long x 6-7/8" tall x 1" deep are the same it should…

view full answer...

What Are The Dimensions Of Brophy BR56VR

Product Page this Question was Asked From

Continue Researching