Lift Kit for Single Square Torsion Axle on Little Guy Max Travel Trailer

Question

Question:

Is there a lift kit for my Little Guy Max travel trailer?

asked by: Ken F

0

Expert Reply:

Thanks so much for the photos, and based on those, your 2018 Liberty Outdoors Little Guy Max travel trailer has a 3,500 lb Lippert square torsion axle, for which we do have the correct lift kit, which is the following:

- Axle Riser Kit - Single Square Torsion Axle # LC382741

This will give you the extra ground clearance you need, adding a 3-1/2 inches of lift to your trailer.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The Dexter Torflex Lift Kits like the Tandem Axle #K71-725-02 that you referenced are only confirmed to work with Dexter Torflex axles. It's possible that the spacers will fit with your AL-KO axles but this has not been tested. The spacers for…

view full answer...

Answer 2

I have a couple of options for you that will lift your tandem axle trailer. The first option is going to be an axle flip kit. This will move your axle below your leaf springs and give you an increase in height equivalent to the diameter of your axle.…

view full answer...

Answer 3

We do have a lift kit for your Lippert 7K torsion axle but the Dexter Torflex Lift Kits like part #K71-725-02 are designed to fit specific Dexter torsion axles. For example, the above mentioned kit will only fit a #12 Torflex axle that has a 5,500 -…

view full answer...

Answer 4

The Brophy Rigid Mount Spare Tire Carrier #BR56VR will allow you to carry a spare tire with Wheel #TA56FR on your 4" RV Bumper. I have included an image below of a similar setup so you can see how it fits.

view full answer...

Answer 5

Based on the information I was able to find on your 2021 Coleman lantern 17B Travel Trailer it looks like it has either a 4" or 4-1/2" square rear bumper. I recommend measuring your rear bumper to confirm this, and if you do in fact have a…

view full answer...

Answer 6

The Stromberg Carlson Spare Tire Carrier #TR-1 isn't compatible with a 14" tire but we do have the Ultra-Fab Folding Spare Tire Carrier #UF15-954730 is compatible with a 14" tire. It is also compatible with most 5, 6, and 8-lug bolt…

view full answer...

Answer 7

The Brophy Rigid Mount Spare Tire Carrier for 4 inch or 4-1/2 inch RV or Mini-Motorhome Bumpers #BR56VR per Bropy states that from the top lug bolt down to the top of the U-bolt is 6-1/2 inches.

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 10

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 11

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 12

The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…

view full answer...

Lift Kit for Single Square Torsion Axle on Little Guy Max Travel Trailer

Continue Researching