Do You Need To Replace The Calipers With A Dust Boot Cover That Is Cracking?
Updated 05/17/2022 | Published 05/16/2022 >
Products Featured in This Question
Question:
Does the caliper on a boat trailer need to be replace if it’s functioning properly despite the dust cover boots having a crack in it? I am serving my boat trailer clean, inspect and repack bearings and noticed my caliper’s dust boot is cracked- calipers work fine but didn’t know if I should replace them bc of cracked boots since the trailer goes in the water to put the boat in. Thanks
asked by: Matt A
Expert Reply:
You can if you want too, however since your calipers are fine you do not need to replace them with your damaged dust boot.
We do carry a variety of dust boots like the Replacement Silicone Dust Boot w/ Metal Core for DeeMaxx 3,500-lb to 6,000-lb Disc Brakes # DE23FR which will work with 3.5K to 6K capacity axles.
Or
We also have the Replacement Rubber Dust Boot for Kodiak Disc Brake Calipers # K338B which will work with axles that have a capacity of 9K to 10K, and # K250BSSSI for axles that have an 7K to 8K capacity.
Product Page this Question was Asked From
Kodiak Disc Brake Caliper Rebuild Kit for 3,500 lb to 6,000 lb Trailer Brakes
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 3500 lbs
- 6000 lbs
- Caliper Parts
- Rebuild Kit
- Kodiak
more information >
Continue Researching
- Shop: Replacement Silicone Dust Boot w/ Metal Core for DeeMaxx 3,500-lb to 6,000-lb Disc Brakes
- Shop: Terran Industries Trailer Idler Hub Assembly for 5,200 to 6,000 lbs Axle - 6 on 5-1/2
- Shop: Kodiak Disc Brake Caliper Rebuild Kit for 3,500 lb to 6,000 lb Trailer Brakes
- Shop: Replacement Trailer Wheel Bearing Kit, Bearings 15123/ 25580, Races 15245/25520 Races, 10-36 Seal
- Shop: Caliper Rebuild Kit for 6,000-lb to 8,000-lb Dexter Disc Brakes
- Shop: Demco Hydraulic Brake Line Kit for Tandem Torsion-Axle Trailers - Drum or Disc Brakes
- Search Results: brake actuator
- Video: Review of DeeMaxx Replacement Silicone Disc Brake Caliper Dust Boot - DE23FR
- Search Results: kodiak brake lines
- Search Results: dust covers
- Shop: Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Video: Review of Kodiak Disc Brake Caliper Rebuild Kit - KDBC225KIT
- Q&A: Recommended Kodiak 225 Caliper Rebuild Kit With Dust Boot
- Q&A: Dimensions of the Replacement Silicone Dust Boot w/ Stainless Steel Core Part # K225BSSI
- Q&A: Will The DeeMaxx Dust Boot Also Fit 3,500LB Kodiak Disc Brake Calipers?
- Article: Trailer Wiring Diagrams
- Q&A: Troubleshooting An Ausco EOH Actuator That Takes 5 Seconds To Start Pumping Fluid
- Search Results: lug nuts
- Search Results: axle nut
- Search Results: kodiak 225 brake caliper
- Search Results: hydraulic brake lines
- Q&A: How to Wire the Dexter Electric Over Hydraulic Trailer Brake Actuator
- Video: Review of Hydrastar Trailer Brakes - Brake Pads - HYD97VR
- Video: Review of DeeMaxx Replacement Rubber Piston Seal - DE35FR
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM3S450
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)

