7,500 lbs Demco Hydraulic Brake Actuator w/ EZ-Latch Coupler

Question

Question:

Demco dm72vr is it e trailer exclusive I dont see it on there website?

asked by: Daryle E

0

Expert Reply:

Yes, the Demco Hydraulic Brake Actuator with item # DM72VR is exclusive to etrailer and you will not find this item # on their website. Demco's actuators are not available to be purchased directly from the manufacturer and must be purchased through a dealer. This hydraulic actuator has the EZ-Latch coupler mechanism for simple, secure hookup and disconnect. It has a gross towing weight of 7,000 lbs and a maximum tongue weight of 700 lbs. It mounts on a straight, 3" wide trailer tongue. If you have anymore questions about this actuator please email me back and I will be happy to help you.

expert reply by: Jerred H

0

Answer 1

Hello Richard, Great news, the Demco actuator you’re looking for is the right one. The Demco DA86 Trailer Brake Actuator for drum brakes, zinc, 2 inch ball, 8,600 lbs #DM98CV is Demco’s 8668601, so you’re on the correct track. I totally get wanting…

view full answer...

Answer 2

Hey Kevin, yes the Dexter A-60 Actuator part #DX49FR does come with a manual override lockout key. If for some reason you were to lose it (it looks easy to lose) we have a replacement with the part #DX94FR. This inserts into the slot opening just…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 7

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

Yes, only the receiver tube opening of the Curt Trailer Hitch Receiver part #C26HR will be visible while installed on your 2017 Ford F-150. I have attached a photo of what the finished product will look like on a similar F-150 for you in addition to…

view full answer...

Answer 10

I do have a solution I can offer you, but the Atwood AT82543 is no longer available. It was discontinued back in 2017. The closest option we have to replace your Atwood 82543 actuator is part #DM72VR. However, it doesn't have the reverse lockout…

view full answer...

7,500 lbs Demco Hydraulic Brake Actuator w/ EZ-Latch Coupler

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching