Are the Dexter E-Z Flex Heavy Duty Rubber Suspension Systems Made in the U.S.A.

Question

Question:

Is this thing made in China??

asked by: Dennis C

1

Helpful Expert Reply:

I spoke directly with Dexter, manufacturer of the E-Z Flex Heavy Duty Rubber Suspension System, # K71-653-00. These kits are indeed made in the U.S.A. We carry 3 different kits and I have included a link to them for you along with a link to our FAQ article on double-eye trailer suspension.

expert reply by: Michael H

1

Answer 1

Yes, you can replace your current Lippert Equa-Flex equalizers with the MORryde AllTrek 4000 Equalizers #MR29DR on your 2018 Highland Open Range. The yellow octagons on the front and rear are a for correcting the alignment of the axles and are not…

view full answer...

Answer 2

Yes, you can purchase the equalizers by themselves from the kit part #K71-653-00. The E-Z Flex 8,000 lb Equalizers alone without the kit components is part #K71-655-00 for a quantity of 2. The equalizers measure 2-7/8" tall by 7-3/4" Long…

view full answer...

Answer 3

The E-Z Flex equalizers like the #K71-653-00 are a nice system, but for your Coachmen Chaparral 391QSMB 5th wheel trailer, the MORryde suspension system you mentioned will absolutely be an upgrade: - MORryde AllTrek 4000 Equalizers for Tandem Axle…

view full answer...

Answer 4

Hey Ken, thanks for reaching out! The MORryde ALLTREK 4000 Shock Absorbing Equalizers, 33" Wheelbase #MR89DR or 35" Wheelbase #MR29DR, are a good upgrade to a standard leaf spring suspension and will help to provide a better ride quality…

view full answer...

Answer 5

Hey Nick, thanks for reaching out! The MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers #MR29DR will work as long as you have a 35" wheelbase (center axle to center axle) and it meets the specs in the attached photos for the qualifier.

view full answer...

Answer 6

Definitely looks like the springs are being overloaded and need to be replaced. You can use higher rated leaf springs but, the higher you go the stiffer the ride will be. Since we know the weight class with your axles the next step would be to…

view full answer...

Answer 7

Hi David; nope, the leaf springs don't need to be changed if going to the AllTrek 4000 equalizers. You just need to choose the right one based on your wheelbase (measured center-to-center of your wheels): - 33" Wheelbase: MORryde AllTrek…

view full answer...

Answer 8

All of the feedback we have had for the MORryde SRE4000 kit has been positive; I have not had anybody come back to me with any type of issue, and I also went and looked through our reviews on this and even similar kits and equalizers and haven't…

view full answer...

Answer 9

I couldn't find any info on the Dexter equalizer part number you mentioned but if the dimensions of the part #K71-653-00 that you referenced match what you have on your trailer this would work well. I attached a picture that has the dimensions of…

view full answer...

Answer 10

The Dexter E-Z Flex Equalizers #K71-655-00 are a great choice. I actually have them on my Jayco Jay Feather and they do a great job smoothing out the ride. These along with the SumoSprings will be a great combination. You currently have 7-3/4"…

view full answer...

Answer 11

There is a really good chance the Lippert Road Armor cushioned equalizer part #LC696740 will fit your 2019 Coachmen Apex 300BHS but you will want to measure your current equalizers to be sure. If your current equalizers has 6 inches between the…

view full answer...

Answer 12

Since the MORryde AllTrek 4000 Equalizers #MR29DR sits inside the middle hanger like a standard equalizer you'd want to use the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR. This crossmember will use your wet bolt and come with…

view full answer...

Are the Dexter E-Z Flex Heavy Duty Rubber Suspension Systems Made in the U.S.A.

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching