What Diameter Wheel Stud Would 7k Lippert Axle Have
Updated 04/28/2025 | Published 04/20/2025 >
Question:
What’s size wheel studs on a Gatormade 14k dump trailer? Busted a lug and need to replace but can’t find exact size. Attached is photo of Lippert axle tag. Thank you!
asked by: Chris S
Expert Reply:
Hey Chris, I appreciate you getting me the axle tag from your trailer as it is helpful to know you have a Lippert 7k axle but that axle can have either a 1/2 inch, 5/8 inch, or 9/16 inch diameter wheel stud so I would need to get any info you can grab off of the hub. Hopefully there's a part number there so that I can determine for sure what you'd need.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 14125A
- Standard Grade
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: spare tire mount
- Search Results: spare tire rack
- Search Results: 8~219
- Search Results: breakaway wire
- Search Results: static/images/styles/checksvg
- Search Results: 233867
- Shop: Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Superwinch Tiger Shark Off-Road Winch - Wire Rope - Roller Fairlead - 18,000 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Search Results: wireless winch remote
- Shop: Bigfoot Hydraulic Jack - Single Pump - Manual Override - 24" Lift - 12,000 lbs
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Video: Review of EMCO Trailer Leaf Springs - Slipper Springs - EM78UJ
- Shop: Towing Mirrors
- Video: What to Know About the Custom Third Brake Light Camera for 8" Factory Monitor
- Q&A: Recommended Third Brake Light Camera System For A 2022 Ford F-350 Super Duty
- Video: All You Need to Know About the Custom Third Brake Light Camera System w/ Rear View Mirror
- Q&A: Replacement for a Dexter 072-032-00 Slipper Spring
- Q&A: Is The Dexter Triple Lip Grease Seal 010-11088 Available
- Video: Feature Review 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles
- Q&A: Replacing Breakaway Switch Cable on Boat Trailer
- Shop: Brake Controller
- Shop: Trailer Wiring
- Shop: Gooseneck Hitch
- Shop: Trailer Hitch
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Q&A: Castle Nut Torque Spec for 7,000 Pound Trailer Axle
- Q&A: Replacement Wheel Bolt Stud That Matches The Lippert 121803 Wheel Stud



Chris S.
4/26/2025
Hello Jameson, sorry took me a few days to get a chance to get a wheel off and look. Here is everything that was on the hub of the trailer. No stickers just stamped on the hub Lippert HMA 23G15 233867. I hope this helps!