Are EZ-Lube Axles Only for Marine Boat Trailer Use
Question:
Im currently redoing a trailer and i need to replace my axles. I have been searching for new axles and i keep finding them online with spindles that have the grease fittings at the end, dexter,rockwell ect. On the current axles im replacing the spindles had no grease fittings as in picture. Are the axles with spindle fittings i keep finding for marine boat use only?
asked by: Dustin S
0
Expert Reply:
The zerk fitting on the spindles you are describing indicates that those are EZ Lube axles like the # T3584F-EZ-8974. You can use these axles on any trailer, they are not limited to marine boat trailers. The zerk fitting on the spindle allows you to add grease without having to remove everything.
In order to find a replacement axle you will need to know the capacity of your current axle, along with the hub face to hub face measurement. This will allow you to choose the correct replacement. If there is not a replacement available you could also use something like the Timbren Axle-Less Trailer Suspension System # ASR3500S05. This fits any frame width and also replaces the suspension.
If you let me know your axle capacity and measurement I would be happy to help you find the correct replacement. I have also included a link to all of our axles which can be filtered out by length and capacity.
expert reply by: Robin H
0
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- How to Determine Correct Length for Replacement 3,500 lb Axle
- Replacement for Al-Ko 405076.9 Trailer Axle
- Replacement Options for Dexter Axle P-15 3,500 Lb
- How to Determine Which Replacement Axle is Needed for 1979 Avion Travel Trailer
- Will Light Load on Trailer Cause Uneven Tire Wear
- Dexter Trailer Axle Measurements on 89 Inch Axle
- Axle Recommendation with 74 inch Spring Center Dimensions
- Finding a Replacement 3,500 Lb Axle
- Replacement Trailer Axle With 89 Inch Hub Flange To Hub Flange Measurement
- How To Measure To Replace Bent Trailer Axle
- Axle Replacement For Tracker Trailstar Trailer
- How Can You Determine Axle Load Capacity on a Dexter Axle
- Recommended Axle To Replace 3000lb Axle With 86.5" Hub Face Measurement On Grand Design TT
- 3,500 lbs. Axle with Hydraulic Drum Brakes Kit
- Wall Thickness of Dexter 3,500 lb Axles
- Will Changing Travel Trailer Axle Increase the Trailers Overall Weight Capacity
- How To Find Right Location To Install Center Equalizer Hangers On 18 Ft Tandem Trailer
- Measuring to Find a Replacement Axle for a 1994 Jayco 1207 Tent Trailer
- Do Both Axles On a Tandem Axle Trailer Need To Be The Same Length
- Is 23 inches from Spring Seat to Hub Face Too Long
- Why do Trailer Axles have an Upward Bow In Them
- How Much More Clearance Under Trailer Using Torsion Axle With Negative Angle
- Replacement Axles for 2004 Big Tex Trailer
- Upgrading a Dexter Torsion Axle to a Heavier Duty Option
- How to Find a Trailer VIN
- How Much Does The Dexter # T3584F-EZ-8974 Axle weigh?