Will BOLT Hitch Locks Cause Wear on Hitch Pin Hole
Updated 04/26/2022 | Published 04/25/2022
Products Featured in This Question
Question:
I have this lock with the 45 degree pin. In use, the curved side of the pin is rounding out the hold in the trailer receiver. Is there a straight shaft that will work with the Bolt lock for a 2.5inch hitch receiver? If not can you recommend a locking hitch pin with a straight shaft that will work on my F250?
asked by: Glenn Z
Expert Reply:
BOLT does not have a version of their hitch locks that has a straight end. That's interesting that yours is rounding out the hitch pin's hole. There really shouldn't be enough friction between the hitch pin and the hitch pin hole to cause that type of wear. In general the hitch pin does not actually bear any of weight of the trailer since the tongue weight pins the ball mount into the hitch so well that no movement is allowed.
To reduce movement which would cause potential wear an immobilizer like the part # BX88312 would hold the ball mount tight to the hitch and would prevent further wear.
Product Page this Question was Asked From
BOLT Trailer Hitch Receiver Lock - 2", 2-1/2", and 3" Hitches - Ford Side-Cut Key
- BOLT Locks
- 5/8 Inch Receiver Locks
- Bolt
more information >
Continue Researching
- Shop: B&W Tow & Stow 3-Ball Mount - MultiPro - 2" Hitch - 2.5" Drop/3.5" Rise - 10K
- Search Results: window visors
- Search Results: vent visors
- Search Results: vent
- Shop: B&W Tow & Stow 3-Ball Mount - MultiPro - 2" Hitch - 4.5" Drop/5.5" Rise - 10K
- Shop: Adapter Rails for 5th Wheel Hitch - GM Towing Prep Package
- Video: B and W Tow and Stow 3-Ball Mount: The Breakdown
- Video: Review of PullRite Adapter Rails 5th Wheel Hitch GM Truck Prep Package - PUL69RR
- Video: Comprehensive Review: B and W Tow and Stow 3-Ball Mount-BW49FR
- Shop: Tonneau Cover
- Shop: PullRite Adapter Kit for Mounting Traditional SuperGlide Hitches to ISR or Gooseneck Rail Systems
- Shop: Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover - Aluminum - Matte Black
- Q&A: Recommended Hitch Receiver Reducer Sleeve for Use with Pro Series Adjustable 2-Ball Mount
- Q&A: Multiple Ball Mount Hitch Compatible With Chevrolet Multi-Flex & GMC MultiPro Tailgate
- Video: B&W Tow & Stow 3-Ball Mount Test Fit - 2025 GMC Sierra 2500
- Video: Ultimate Overview of the B and W Tow and Stow 3-Ball Mount-BWTS20067BMP
- Shop: B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5.5" Rise - 10K - Browning
- Shop: B&W Tow & Stow 3-Ball Mount - 2-1/2" Hitch - 4-1/2" Drop/Rise - 18K - Black
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: Does The Replacement 18:1 Tuson Motor for Lippert Through-Frame Slide-outs Have An Internal Clutch?
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: Can I Get The 24" Lippert Slide Out Actuator By Itself Without The Motor?
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lippert Replacement Slide Out Actuator 379545
- Shop: Suspension Enhancement
- Video: Checking Out the Pace Edwards Switchblade Retractable Hard Tonneau Cover
on BOLT Locks
