Recommended Replacement for WFCO WF-8845 45 Amp Power Converter

Question

Question:

I have a WFCO 45 Amp Power Converter, Model WF-8845 Input of 105-130 VAC, 60Hz, 11.6 amps Output of 13.6VDC, 45 amp. This model is no longer available. Can you let me know which power converter to purchase that replaces this WFCP model? Thanks.

asked by: Lee K

0

Expert Reply:

Sounds like you're needing the Progressive Dynamics Inteli-Power RV Converter and Battery Charger # PD9145ALV which is compatible with the popular lithium batteries and is also rated for 45 amps so it will be a great replacement for your WFCO WF-8845 converter.

expert reply by: Jon G

0

Answer 1

We do have a solution available for you. I suggest you replace your current inoperable WF-8845 with a Progressive Dynamics option as these are solid and reliable units that are very cost effective. The 12VDC, 45 Amp, Inteli-Power RV Converter and…

view full answer...

Answer 2

Hey Jeff, The WFCO WF-8955PEC isn't lithium compatible so that's why your battery isn't fully charging. You can replace the converter section with the Progressive Dynamics #PD4655V and then move the black jumper over to the 'LI'…

view full answer...

Answer 3

Hey Jimmy, thanks for reaching out! The Progressive Dynamics 9200 Inteli-Power Converter #PD9245C is only able to charge standard batteries, so if you have Lithium batteries, you're going to need the 9300 Series #PD69RR instead. Are you upgrading…

view full answer...

Answer 4

Hey Patrick, thanks for reaching out! It sounds like you're needing the Progressive Dynamics 4000 Series Mini RV Converter w/ Charge Wizard and AC/DC Distribution Panel #PD4045KA. If you're wanting just the converter part then the Progressive…

view full answer...

Answer 5

Based on the pictures you've provided it looks like you have a press in wiper seal like the Rubber Wiper Seal for RV Slide Outs - Channel Mounted Press-In - 15' Long #SR94FR. We also carry this in 30' #SR44FR and 60' #SR64FR lengths.…

view full answer...

Answer 6

Hi! the tool you're looking for is the Steele Rubber Scraper and Rubber Tuck Tool, Part #SR38YD. Even if you already have a mallet, the tuck tool serves a different purpose. It's designed to help guide and press the rubber seal into the…

view full answer...

Answer 7

Hi Nolan, There have not been updates or modifications for the 30' long Rubber Wiper Seal for RV Slide Outs #SR44FR. It is meant to be durable, so it is definitely going to be stiff.

view full answer...

Answer 8

Manufacturer's don't list the wiper or bulb seals that they use and have been known to run out of a certain kind and switch to another so you honestly have to pull off a bit of your current seal to determine the profile and take some…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Recommended Replacement for WFCO WF-8845 45 Amp Power Converter

Continue Researching